D-Link Forums

The Graveyard - Products No Longer Supported => Hubs and Switches => DES-1228P => Topic started by: xturnlgod on October 21, 2009, 12:53:15 PM

Title: managing DES-1228P if it is on a different subnet
Post by: xturnlgod on October 21, 2009, 12:53:15 PM

Hi all,
I currently have a DES-1228P with two 3140AP access points. This all works fine (internet, shares range etc).
These 3 devices are on a subnet  : 192.168.10.x /24
the computer I want to use to run Dlink Smart WLAN Manager from is on 192.168.0.230 /24 (a different subnet)
I'm pretty sure I could find this info in the user guide, but the download seems to crap out for some reason :(
Anyways, is there a way to get the DLink WLAN Manager to work via another subnet?
Keep in mind, I control all these networks; if all i have to do is open up and redirect certain ports, it's not a problem.

thanks for your help in advance!!
-XturnLGod

Title: Re: managing DES-1228P if it is on a different subnet
Post by: Fatman on October 22, 2009, 09:13:07 AM

If you have a routed path between subnets, and appropriate gateways on all machines it should not be an issue.  The communication here is SNMP.

Title: Re: managing DES-1228P if it is on a different subnet
Post by: xturnlgod on October 23, 2009, 11:23:46 AM

Well, as for routed paths....the setup is as follows:

modem---W_-subnet A-_L----W_-subnet B-_L----

So, my computer is in subnet A, on the LAN side (L)
my dlink equiment is in subnet B on the LAN side (L)
basically, it's modem-router-router, I'm on the LAN side of one router, and the dlink is on the LAN of the 2nd router.

I just need to know which ports to punch through.

thanks!
-XturnLGod

Title: Re: managing DES-1228P if it is on a different subnet
Post by: Fatman on October 23, 2009, 11:27:33 AM

Do the routers have routes for each others LANs?