D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: zeco on November 09, 2009, 09:20:51 PM

Title: DFL-VPN config problem. (newbe )
Post by: zeco on November 09, 2009, 09:20:51 PM

Hi !

I wonder if i have missed something in my VPN config and if you can help me.
I have put up a PPP tunnel and can connect to the firewall.... but when the sec VPN connection get connected the first one get disconnected  ???. The Licens in the fire wall say that i can have 50 tunnel`s and the authentication rule say that you can have multiple connections on the same username....


I have another starange thing.... when my VPN connection is up, i can ping my servers behind the FW and i can run RDP on the servere, but i can not map a network share  :o..... The rule is set to alow all services from the VPN pool to the LAN ..

IF anyone can give me a hint on what i have missed in my config i be gald.... :D

Title: Re: DFL-VPN config problem. (newbe )
Post by: Fatman on November 10, 2009, 08:34:17 AM

Are both of your clients connecting from the same NAT IP?

You can only have a single PPTP tunnel to any pair of endpoint IPs.

Are you trying to map that drive by IP, DNS, or by share name?  Share names will not work in a PPTP environment unless you have a NBNS/WINS server set up and configured on your client.

Title: Re: DFL-VPN config problem. (newbe )
Post by: zeco on November 11, 2009, 10:42:41 PM

AHH !!!.... yes ofc, both is nattèd thrue the same place :(..... even if the computers have different IP adresses they are nattèd true the same place at my ISP :(.....

I tryed to map the drive by \\IP-addsess\share name and i tryed just the \\ip-address to the server but non is working.... i will try setting up a Wins server and see if that work...