D-Link Forums
The Graveyard - Products No Longer Supported => DNS-323 => D-Link Storage => Beta code! => Topic started by: rockystarhk on December 27, 2009, 07:51:17 AM
-
DNS323 1.08B
Harddrive 1: WDC WD5000AAKS-00C8A WD-WCAS87499615 500 GB
Harddrive 2: WDC WD5000AAKS-00C8A WD-WCAS87564275 500 GB
□ Function does not work
Problem Description:
I have these NAS run in Raid 1 for almost 2 years and it worked fine before the 1.08 update
However, the raid 1 degraded and not able to rebuild.
As you can see, one of the Harddrive is not working
(http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs131.snc3/17874_375015795443_571635443_10373093_5513634_n.jpg)
and the manually rebuild Raid button is grey..
After I unplug the working Harddrive, the one that was not working will work again:<
it seems like that i cant put these 2 drives in raid one again
-
Pull the non-working drive and connect it to a system and run the WD diagnostic format utility on it. This will also tell you if the drive is good. Put it back in and see if you can get the RAID to rebuild at that point.