• February 23, 2025, 12:56:01 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: No connection after resuming from standby...  (Read 10691 times)

CadErik

  • Level 2 Member
  • **
  • Posts: 29
No connection after resuming from standby...
« on: January 21, 2010, 07:05:29 AM »
I have vista 64 ultimate and my DWA-552 doesn't seem to be able to reconnect after resuming from standby. I tried many different driver versions with no luck on this issue :-(

Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: No connection after resuming from standby...
« Reply #1 on: January 22, 2010, 09:44:12 AM »
Quote from: CadErik on January 21, 2010, 07:05:29 AM
I have vista 64 ultimate and my DWA-552 doesn't seem to be able to reconnect after resuming from standby. I tried many different driver versions with no luck on this issue :-(



Hi CadErik,

This is why, it is always recommended that you Shutdown the computer rather than putting the computer in Standby mode.

And to make matters worse, I saw where Microsoft was thinking about an Operating system for 128 Bit Systems.

D-Link doesn't have it right for 64-Bit Systems.

Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

retread

  • Level 2 Member
  • **
  • Posts: 25
Re: No connection after resuming from standby...
« Reply #2 on: January 25, 2010, 07:24:14 PM »
Quote from: CadErik on January 21, 2010, 07:05:29 AM
I have vista 64 ultimate and my DWA-552 doesn't seem to be able to reconnect after resuming from standby. I tried many different driver versions with no luck on this issue :-(



Please report back if this helped at all.... I am reluctant to believe your problem is this simple.  More than likely you have more problems than you realize.
Logged

CadErik

  • Level 2 Member
  • **
  • Posts: 29
Re: No connection after resuming from standby...
« Reply #3 on: January 26, 2010, 03:28:12 PM »
Quote from: retread on January 25, 2010, 07:24:14 PM
Please report back if this helped at all.... I am reluctant to believe your problem is this simple.  More than likely you have more problems than you realize.

After waking up the DWA 552 has a yellow sign - any suggestions?
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: No connection after resuming from standby...
« Reply #4 on: January 26, 2010, 05:41:47 PM »
Hi CadErik,

I means that it has not fully reconnected to the Router. Reboot and see what happens. If it doesn't connect after a reboot, something is wrong.
Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

CadErik

  • Level 2 Member
  • **
  • Posts: 29
Re: No connection after resuming from standby...
« Reply #5 on: January 26, 2010, 05:54:50 PM »
Quote from: thecreator on January 26, 2010, 05:41:47 PM
Hi CadErik,

I means that it has not fully reconnected to the Router. Reboot and see what happens. If it doesn't connect after a reboot, something is wrong.

Reboot always works - yellow is in the device manager not the network
Logged

thecreator

  • Level 6 Member
  • *
  • Posts: 795
Re: No connection after resuming from standby...
« Reply #6 on: January 28, 2010, 02:56:05 PM »
Quote from: CadErik on January 26, 2010, 05:54:50 PM
Reboot always works - yellow is in the device manager not the network

Hi CadErik,

Is the yellow in the Device Manager for the card before and after you reboot the computer? You have a Vista 64-bit Computer, which I don't have, and can't test.

Have you upgraded its drivers?

I have a 32-bit Computer with Windows XP Home Edition Service Pack 3 and Windows 7 Ultimate 32-bit computer. I don't put the computer into Standby at all.



Logged
thecreator - Running a Verizon FIOS / Fios-G1100 Router into a D-Link DIR-859 Router Rev. A3, Firmware 1.03 and a D-Link DWA-552 Wireless Network PCI Adapter Card. OP Sys: Win 10 Pro - DNS-323 with Firmware 1.10

CadErik

  • Level 2 Member
  • **
  • Posts: 29
Re: No connection after resuming from standby...
« Reply #7 on: January 28, 2010, 04:20:33 PM »
Quote from: thecreator on January 28, 2010, 02:56:05 PM
Hi CadErik,

Is the yellow in the Device Manager for the card before and after you reboot the computer? You have a Vista 64-bit Computer, which I don't have, and can't test.

Have you upgraded its drivers?

I have a 32-bit Computer with Windows XP Home Edition Service Pack 3 and Windows 7 Ultimate 32-bit computer. I don't put the computer into Standby at all.

The yellow mark only appears after resuming from standby other than that, it works perfectly. I have a DWA-552 on another computer running Vista 32 bit and it works without a glitch.
Also this computer was resuming from standby without issues on Win XP.
I suspect a driver issue. I'm considering moving to Win7 Home 32bit.

Erik.
Logged