• February 27, 2025, 06:58:41 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Power recovery settings  (Read 5345 times)

dmnc_

  • Level 1 Member
  • *
  • Posts: 9
Power recovery settings
« on: September 20, 2010, 12:38:26 AM »
I have two DNS-323, one I bought like last week, and the other is 1.5 years old. Both are running 1.08, but only one of them (the newer) has a setting for Power Recovery in the power management tab. Does this mean they are different hardware revisions, and could this difference be the reason why only one of them (again, the newer) is showing the popular fan-never-goes-off-although-set-to-auto/off/low/high bug?
Logged

scaramanga

  • Level 2 Member
  • **
  • Posts: 99
Re: Power recovery settings
« Reply #1 on: September 20, 2010, 04:49:15 AM »
The new unit is probably Hardware revision C1. There should be a sticker on the bottom of the units that will tell you which HW Rev they are.
Logged
DNS-323 HW Rev. C1 FW 1.08 fun_plug 0.5
2 x Western Digital WD10EARS-00Y5B1 in Standard mode
(LLC changed to 5 minutes. Partitions aligned to 4K boundary)

dmnc

  • Level 1 Member
  • *
  • Posts: 11
Re: Power recovery settings
« Reply #2 on: September 20, 2010, 05:11:03 AM »
Yeah. I'm at work right now so I can't check it, but after reading a couple of threads on here I think this must be the case (C1) Are there any known solutions to this bug other than waiting for 1.10?
Logged