Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hany_bw]

can any one help me i need a step by step setup for the DFL-800
i got 2 internet lines (no fixed ip)
i don't know what i should do and what addresses i should use for them to make them available for use ?
also i don't know what to do in the DFL-800 to make all network see internet
i try the setup wizard but no success


i'm new in network field so help me plz 

[danilovav]

What you want to have - load balancing or favorier?

[hany_bw]

balancing  plz

[danilovav]

1) Interfaces > wan1
Check "enable DHCP client"
On Routing tab, check off "automatically add default route if gw is specified"
Do the same for wan2

2) Intrefaces > Interface groups
Make group "wans" with wan1 and wan2

3) Rules > IP rules > lan_to_wan1
Change in all rules destination interface from wan1 to wans

4) Routing > Routing tables > main
Add routes (keep "local IP address" blank and enable host monitoring with DNS servers or some external stable host)
wan1 all-nets wan1_gw 100
wan2 all-nets wan2_gw 100

5) Routing > Route load balancind > Instances
Add new instance on table "main" with algorithm "destination"

It's minimal RLB configuration.

[hany_bw]

thanks i'll try it and i'll return to tell u the result

[hany_bw]

 
not working
i'll
the 1st DSL line router ip is 192.168.2.1. DHCP server enable
the 2nd DSL line router ip is 192.168.3.1. DHCP server enable

i don't have fixed IP also i don't have DNS from the ISP

what's missing ??
 

[danilovav]

1) Show Status > Routes

2) Try to ping something by IP (ex, 8.8.8.

[hany_bw]

i did, all i can get is local IPs but when i try to get outside the network i don't get any connection
i can't even get to the router screen.

i need a step by step setup for beginner or maybe a lower than the beginner
i need to know what to do from the beginning plz 

[hany_bw]

i did it thnx for your help