• February 24, 2025, 10:37:08 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DFL-210 VPN Client to Site  (Read 6915 times)

crobison

  • Level 1 Member
  • *
  • Posts: 10
DFL-210 VPN Client to Site
« on: July 18, 2010, 06:26:22 AM »

I used the vpn DFL-210, DFL-800, DFL-1600 How To Setup PPTP VPN Between Windows PPTP Client and the Firewall instructions.  I setup the Microsoft VPN Client and I am able to login no problem, but the IP that is assigned is the one configured for vpn on the firewall.  The issue is that it is not assigning a gateway or dns to be able to access the internal network..  I am 99% of the way there, just need to know what I have to configure to get the gateway and dns.. 

Thanks you..
Logged

danilovav

  • Level 4 Member
  • ****
  • Posts: 424
  • Alexandr Danilov
Re: DFL-210 VPN Client to Site
« Reply #1 on: July 19, 2010, 12:53:46 AM »

Do you want to have Internet thru DFL when you're connected?
Logged
BR, Alexandr Danilov

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: DFL-210 VPN Client to Site
« Reply #2 on: July 19, 2010, 08:48:57 AM »

You do not need a gateway for PPTP traffic, all traffic egresses over the tunnel.

If you need a DNS it goes under Interfaces->PPTP Server, its on like the 3rd tab or so.
Logged
non progredi est regredi

crobison

  • Level 1 Member
  • *
  • Posts: 10
Re: DFL-210 VPN Client to Site
« Reply #3 on: July 23, 2010, 09:36:05 AM »

Then why can I not ping the computers inside the network?
Logged

danilovav

  • Level 4 Member
  • ****
  • Posts: 424
  • Alexandr Danilov
Re: DFL-210 VPN Client to Site
« Reply #4 on: July 23, 2010, 12:04:27 PM »

Show Status > Routes from DFL after you got connect thru PPTP.
Logged
BR, Alexandr Danilov

crobison

  • Level 1 Member
  • *
  • Posts: 10
Re: DFL-210 VPN Client to Site
« Reply #5 on: August 02, 2010, 11:27:33 AM »

Issue was resolved, thank you..
Logged