Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Billabongqc]

Hi,

When I use Emule, I'm always on LowID. I have a DFL-210 (and DIR-825 for router).

I wanna know the procedure to make for opening ports 4662 for TCP and 4672 for UDP.

thanks!

[danilovav]

1) Objects > Services
Add services:
TCP service named tcp-4662 with destination 4662, keep source by default
UDP service named udp-4772 with destination 4672, keep source by default
Add service group named emule = tcp-4662 + udp-4672

2) Rules > IP rules
SAT wan/all-nets core/wan_ip emule (SAT: new destination = your local IP)
Allow wan/all-nets core/wan_ip emule

[Billabongqc]

Thanks for the answer.

If i have 3 computers with emule, i have to do the SAT setting for each computer?

AND...


For SAT:

--ญญญญญ) GENERAL
Name : I choose the name
Action : SAT
Service : emule = tcp-4662 + udp-4672
Schedule: none

--ญญญญญ) ADRESS FILTER
Source interface : WAN
Source Network : all-net

Destination interface :core
Destination Network : wan_ip

and fot the SAT setting:
Translate the DESTINATION IP
    New ip Adress : the ip of my computer


For ALLOW:
--ญญญญญ) GENERAL
Name : I choose the name
Action : Allow
Service : emule = tcp-4662 + udp-4672
Schedule: none

--ญญญญญ) ADRESS FILTER
Source interface : WAN
Source Network : all-net

Destination interface :core
Destination Network : wan_ip


is it that?

[danilovav]

You should make actions i wrote before 3 times - for every PC with emule. Ports in service should be different, "emule" groups - too.

About rule. wan/all-nets CORE/WAN_IP. In SAT tab, set local PC address.

[Billabongqc]

Thanks,
my emule is HighID now