• February 24, 2025, 11:22:39 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Static IP  (Read 7736 times)

dichamw

  • Level 1 Member
  • *
  • Posts: 6
Static IP
« on: October 27, 2009, 04:51:55 PM »

Newbie.  Almost canned/RMAed my DNS-343 and was going to call DLINK every name in the book.  Loss connection to my network for no apparent reason.  First thought it was a overheat problem, removed drives, button resets.  Had to assign static IP, unable to receive DHCP.  Keep giving me screw up IP address if use DHCP.   Anybody else seen this problem and have better solution?
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: Static IP
« Reply #1 on: October 28, 2009, 02:01:37 PM »

What is the IP address you are receiving?
Logged
Never forget that only dead fish swim with the stream

dichamw

  • Level 1 Member
  • *
  • Posts: 6
Re: Static IP
« Reply #2 on: October 28, 2009, 02:06:24 PM »

192.168.0.14
Logged

D-Link Multimedia

  • Level 7 Member
  • **
  • Posts: 1066
    • D-link Systems, Inc.
Re: Static IP
« Reply #3 on: October 28, 2009, 02:47:51 PM »

Newbie.  Almost canned/RMAed my DNS-343 and was going to call DLINK every name in the book.  Loss connection to my network for no apparent reason.  First thought it was a overheat problem, removed drives, button resets.  Had to assign static IP, unable to receive DHCP.  Keep giving me screw up IP address if use DHCP.   Anybody else seen this problem and have better solution?

If you are receiving an IP address that is not in your subnet, then you have another DHCP server on your network. The DNS-343 doesn't just makeup numbers. It will either default to 192.168.0.32 when NO dhcp is found, or it will get dhcp properly.
Logged

dichamw

  • Level 1 Member
  • *
  • Posts: 6
Re: Static IP
« Reply #4 on: October 28, 2009, 05:35:58 PM »

Correct, found my wireless ARCHOS 705 on IPL 192.168.0.14.  Disconnected the Archos and was able to enable DNS 343 DCHP via the easy search application, which reassigned the DNS 343 to 192.168.0.14 and able to restore connectivity.  Re enabled the wireless archos 705 and its DCHP assigned it to 192.168.0.18.  The DNS 343 do not release from 192.168.0.14  reset or power off, even power cycled my DGS1016D switch.  Although it now dynamic DNS, it seem locked on 192.168.0.14.   
Logged

D-Link Multimedia

  • Level 7 Member
  • **
  • Posts: 1066
    • D-link Systems, Inc.
Re: Static IP
« Reply #5 on: October 29, 2009, 11:23:14 AM »

Most likely your router gave our the same IP twice, I would highly suggest setting the DNS-343 IP address to static and outside of the range of your DHCP server so this does not happen in the future.
Logged

dichamw

  • Level 1 Member
  • *
  • Posts: 6
Re: Static IP
« Reply #6 on: October 30, 2009, 06:23:55 AM »

I have put the DNS 343 on static IP of 192.168.0.32 outside the range of IP on the DIR 825 - 192.168.0.10 to 192.168.0.30 to accommodate 20 IPs.  I have seven IP devices on DGS-1016D; 4 deskstops, one  DNS 341, DIR 825 router, HP officejet l7600 printer, one DNS 343.  Then three wireless devices Archos 605, Archos 705, and HP210 PDA on the DIR 825 router.  Now does the DNS 343 on the static outside the range, enjoy less bandwidth or functions of the devices that are inside the range, simply is it disavantaged outside the range of the DIR 825?
Logged

D-Link Multimedia

  • Level 7 Member
  • **
  • Posts: 1066
    • D-link Systems, Inc.
Re: Static IP
« Reply #7 on: October 30, 2009, 11:45:11 AM »

No there is no bandwidth restrictions because it is outside of the range. It is simply on an IP address that is not distributed by the DHCP server.
Logged