• February 24, 2025, 04:36:12 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: FW 1.06 upgrade failiure  (Read 4691 times)

Mannen

  • Level 1 Member
  • *
  • Posts: 6
FW 1.06 upgrade failiure
« on: December 30, 2008, 03:50:16 AM »
I have been running FW 1.05 since it came out, whit no problems. Today i upgraded to 1.06, and the process was ok, but after apprx. 10 min the HD lights turned purple.

Before this happend all the files were accessible, but obviously not after purpel lights lit.

Now what on earth is this? Dont like...
Logged

hilaireg

  • Level 3 Member
  • ***
  • Posts: 348
Re: FW 1.06 upgrade failiure
« Reply #1 on: December 30, 2008, 09:03:45 AM »
Try downgrading to f/w 1.05 ... hopefully the HDD's will be accessible and your content retrievable.

If all is fine, I advise:

- performing a full backup
- upgrading to f/w 1.06
- resetting factory defaults
- reformatting HDD's with desired HDD configuration
- restoring data to DNS


HTH,
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: FW 1.06 upgrade failiure
« Reply #2 on: December 30, 2008, 04:42:03 PM »
What is the status of you RAID configuration in the status page? If it is degraded try the Manual rebuild on the Tools<RAID tab of your DNS-323.
Logged
Never forget that only dead fish swim with the stream

Mannen

  • Level 1 Member
  • *
  • Posts: 6
Re: FW 1.06 upgrade failiure
« Reply #3 on: December 30, 2008, 06:30:13 PM »
I DL´d the 1.05 and everything was fine. Just very annoying that the new FW didnt work out of the box. Maybe i will do the rebuild, but why? Just to much hassle.
Logged

hilaireg

  • Level 3 Member
  • ***
  • Posts: 348
Re: FW 1.06 upgrade failiure
« Reply #4 on: December 31, 2008, 08:28:30 AM »
A bad f/w update is usually a sign that something is up; as per my previous response ...

Make the time to do a *full* backup of the data on your DNS and rebuild the DNS configuration and HDD RAID after re-applying f/w 1.06.  While your at it, take a moment to check the HDD vendor site to see if the HDD's you are using have a f/w update available for them.

I suspect that there is some form of corruption that will 'trip' you up in future f/w updates.  Last thing you need to find out is that the files stored on the DNS are (or are being) corrupted.

Cheers,
Logged