• February 24, 2025, 01:16:01 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How to choose band so that my new phone can acess the internet via dlink.  (Read 6823 times)

minit55

  • Level 1 Member
  • *
  • Posts: 4

I have just gotten a new touch phone that has wifi. and i wanna use it through my dlink dir-825 router.

My phone is the nexus s with 2.3 andriod OS.

The problem is that my phone can see the 2.4 ghz connection it just keeps reporting "deactivated" i did acess other wifi and used the internet over a router. So i know the phone works.

So my question is:
1. Can i make my router ONLY be in 2.4ghz mode, if so, can you link or explain it???

2. Does anyone else have the same phone/router/problem that i do and have a solution for it ???

Regards.
Logged

minit55

  • Level 1 Member
  • *
  • Posts: 4

Oh by the way

Hardware Version: B1   Firmware Version: 2.01EU ( i found a new version dir825_revB_FW_205NA) Does this update apply to my router also ?

I am IN europe ( denmark).

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting

try changing the WiFi mode to single mode G or Mixed G and N. Set up the Security for WPA/WPA2 and Auto Cipher with a password.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

minit55

  • Level 1 Member
  • *
  • Posts: 4

try changing the WiFi mode to single mode G or Mixed G and N. Set up the Security for WPA/WPA2 and Auto Cipher with a password.

Can you pls direct me to a site/link where theres a guide to do this step by step ?? My problem is that partly i do not know how to make it run in "single band"

ty
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting

192.168.0.1 and log in to the routers web page.

Setup/Wireless/Manual settings.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

minit55

  • Level 1 Member
  • *
  • Posts: 4

Working now, thank you..!!! Had to restart phone after setting router to g.band and its up and runing now..!! ;D ;D ;D ;D
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: How to choose band . (RESOLVED)
« Reply #6 on: March 21, 2011, 06:56:49 AM »

Good to hear, enjoy.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GODZiGGA

  • Level 1 Member
  • *
  • Posts: 2

I have both a Nexus S and the DIR-825. You don't need to setup your router to be "G" only or even 2.4 GHz only. The phone supports the "N" band.

My settings are as follows:
Wireless Band: 2.4GHz Band
Enable Wireless : [Checked] Always
Wireless Network Name : "Whatever you what"
802.11 Mode : Mixed 802.11n, 802.11g and 802.11b
Enable Auto Channel Scan : [Checked] (uncheck this if you want to manually select your channel)
Wireless Channel : [grayed out if auto scan is checked]
Channel Width : [Auto 20/40MHz]
Visibility Status :   Most people want their WiFi visible

Security: "Whatever you decide" I use WPA-Personal

WPA Mode: [WPA2 Only]
Cipher Type: [AES]
Group Key Update Interval: [3600]

Wireless Band: 5GHz Band
Enable Wireless : [Checked] Always
Wireless Network Name : "Whatever you what" (I add 5GHz behind the SSID to differentiate the two networks)
802.11 Mode : Mixed 802.11n and 802.11a
Enable Auto Channel Scan : [Checked] (uncheck this if you want to manually select your channel)
Wireless Channel : [grayed out if auto scan is checked]
Channel Width : [Auto 20/40MHz]
Visibility Status :   Most people want their WiFi visible

Security: "Whatever you decide" I use WPA-Personal

WPA Mode: [WPA2 Only]
Cipher Type: [AES]
Group Key Update Interval: [3600]


Make sure you have the newest version of Android (2.3.3) as 2.3 and 2.3.1 were really buggy, I had problems with my WiFi on 2.3.1. I would also suggest rooting your phone and flashing Cyanogenmod 7 to your phone if you really want to unlock the full potential of the phone. See the links below for more information on rooting and Cyanogenmod if needed.


http://www.cyanogenmod.com/
http://forum.xda-developers.com/forumdisplay.php?f=880
Logged