• February 22, 2025, 03:13:51 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: dpr-1260 & jumbo packets  (Read 6216 times)

Tiny

  • Level 1 Member
  • *
  • Posts: 1
dpr-1260 & jumbo packets
« on: May 15, 2010, 02:14:44 PM »

It took me a while to find out that the dpr1260 will look up immediately when it's connected to a network that has jumbo packets enabled (MTU bigger then 1500) and someone is trying to access it. Firmware is 1.24.

Is there any solution to fix this?

Tiny
Logged

jamesc215

  • Level 1 Member
  • *
  • Posts: 1
Re: dpr-1260 & jumbo packets
« Reply #1 on: May 28, 2010, 03:39:51 PM »
Hey Guy..

Wish I had seen your post earlier.. I'm not trying to take your credit for finding the jumbo frame issue I posted the same findining in the main tread... I Just discovered it myself..  But I did note that I can use jumbo frames on any PC in my network not using a 64 bit OS's and setting all my 64 Bit OS's to normal frames allows everyone to work OK..

JC
Logged

paladin252

  • Level 1 Member
  • *
  • Posts: 2
Re: dpr-1260 & jumbo packets
« Reply #2 on: February 18, 2011, 11:44:06 AM »
same thing happened to me. thanks to this post i was able to get back into my print server. was about ready to go out and buy a new one. wish d-link would fix this, they dont have to add jumbo frame support, but allowing it to keep working while there is jumbo frames on the network would be handy.
Logged