• February 24, 2025, 01:31:16 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DFL-800 Static IP Problem  (Read 4455 times)

hassankazmi

  • Level 1 Member
  • *
  • Posts: 7
DFL-800 Static IP Problem
« on: March 09, 2011, 11:47:43 PM »
Dear All,

I am having DFL-800 and having a series of public IP. WAN1 and WAN2 is working great but the problem is that one of IP camera in my network i want to see its view remotely. I have applied APR method and set appropriate rules but not working  so far. Please help me out quickly.

If you want to know any thing else, do let me know.

Regards,
Hassan Kazmi
« Last Edit: March 10, 2011, 12:39:34 AM by hassankazmi »
Logged

silver_surfer30

  • Level 3 Member
  • ***
  • Posts: 107
Re: DFL-800 Static IP Problem
« Reply #1 on: March 10, 2011, 01:56:38 AM »
can you give us a little bit more about the rules you made and the logs you have on the DFL when trying to access the camera.

Can you describe a little more the usage of the two wans interfaces (load balancing, load sharing) ?
Logged

hassankazmi

  • Level 1 Member
  • *
  • Posts: 7
Re: DFL-800 Static IP Problem
« Reply #2 on: March 12, 2011, 01:03:59 AM »
Thank you for asking.

Well, I have two WAN connections and both are having static IP. On WAN1 i am having almost 4 to 5 static IP series in which one is to use for DFL-800 access from outside while rest of the IP are free yet. I am having almost 10 IP cameras of Panasonic in my network in which i decided to watch one camera from outside. My camera address is 192.168.0.214 in internal local LAN. I created one public ip entry and virtual ip entry on interface addresses below objects. virtual ip is 192.168.0.214 and public ip is xyz. I even created an entry in ARP table for publishing my public ip and then set the rules as directed in given example for SAT port forwarding. now the problem is that when i try to access my camera from outside, it doens't work while internaly i am able to access the camera from both IP public as well as private. MY WAN failover is working fine and even i have configured IPSEC tunnel with another DFL-800 which is working absolutely great. I am able to access both networks from both sides. I am just stuck with this IP camera. Please help and if you need any further information do not hesitate to let me know.

Your early response would be highly appreciated.

Regards,
Hassan Kazmi
Logged

hassankazmi

  • Level 1 Member
  • *
  • Posts: 7
Re: DFL-800 Static IP Problem
« Reply #3 on: March 12, 2011, 01:57:42 AM »
Thank you very much. My Cam is working now. I just changed the order of rules and it started working suddenly. I am more than happy now. this forum is good but the response is slow. Anyways, Good way to share experiences.

Regards,
Hassan Kazmi
Logged