• February 22, 2025, 11:05:38 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Firmware 1.10b5 Causes fan (low/high) to no longer work  (Read 4263 times)

lopan

  • Level 1 Member
  • *
  • Posts: 20
Firmware 1.10b5 Causes fan (low/high) to no longer work
« on: March 10, 2011, 06:02:23 PM »
Hello

I have two DNS 323's.  Ones is revision B1 and the other is revision C1.

On both units I have installed firmware 1.10b5.  I noticed afterwards that on the b1 the fan was no longer spinning on low when it had in the past.  Instead it wasnt spinning at all.  The c1 on the other hand was still working on low and high.

When the b1 gets hotter it seems to spin on the low speed where it would normally spin on the high speed had it been working correctly.  (not 100% percent sure)

I have tried restoring to factory settings, installing the fw, restoring to factory settings again and every combination i can think of.  I have not loaded a saved config file and have made all changes manually.

Any thoughts?
Logged

tosbert

  • Level 1 Member
  • *
  • Posts: 9
Re: Firmware 1.10b5 Causes fan (low/high) to no longer work
« Reply #1 on: March 11, 2011, 12:48:36 PM »
My fan hasn't been on since I flashed 1.10 although the temp never rises above 42.
Logged