• February 23, 2025, 07:15:38 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: MyDlink does not work other than Port 80.  (Read 6572 times)

activemind

  • Level 1 Member
  • *
  • Posts: 8
MyDlink does not work other than Port 80.
« on: May 23, 2011, 06:45:56 AM »
I have a DCS-930L and when I was viewing from mydlink.com, it works fine.  However, it is interfering with my personal web server which is also hosting on Port 80.  When I change the port on DCS-930L configuration page to other port like 8080, I can't view it on mydlink.com, but if I view it locally, it works which defeats the whole purpose.  Does anyone out there have similar issue or suggestion as to how I could get around this?
Logged

Colecago

  • Level 1 Member
  • *
  • Posts: 3
Re: MyDlink does not work other than Port 80.
« Reply #1 on: May 28, 2011, 02:09:49 PM »
I've noticed this as well.  You can go straight to the ip address for the cam, use a dynamic dns service so it stays the same xxx.xxx.xxx.xxx:port and it will work as long as everything is forwarded correctly in your router.  You don't even need UPnP if everything is forwarded right.
Logged

alt0422

  • Level 1 Member
  • *
  • Posts: 1
Re: MyDlink does not work other than Port 80.
« Reply #2 on: September 12, 2011, 11:57:00 PM »
you can keep using the port 80 to your personal web page, the way that you can set up right is by virtual servers, that means that you can have a multiple internal web servers using the port 80 but declared in different ports in the router.
Logged