Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GerikBensing]

[SOLVED]


I have a DGL-4300 Router that connects to a DWL-2200AP in another building.  Both units had a wireless signal.  The other day my power went out, and when it came back on, the wireless signal from the DWL-2200AP unit stopped working.  I tried an old DI-514 unit I had and it would not emit a wireless signal either.  All Ethernet cables are sending their signals just fine. There are some other connections to the router as well.



I assume some settings were lost and it no longer works.  Both units have been reset to factory defaults.  What must I do to correct this problem?

[FurryNutz]

Try powering off everything. Power on the 4300 first, then power on the DWL unit after the 4300 is ready.
Set the Mode to Single mode G.
Check the channel and the Super G mode, try it with it disabled then enable it.

[GerikBensing]

Ah, I fixed it.  Your method didn't work, but for whatever reason when I plugged in the DWL-2200AP again it allowed me to get to the control panel (it hadn't before).  It then told me the firmware was corrupted and I re-installed it and now it works.  So strange how it only decided to work now.

Thanks

[FurryNutz]

wow power outage corrupts the DWL huh? Well glad you found the fix man. Enjoy.