• February 23, 2025, 08:06:48 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Are my files still intact?  (Read 7596 times)

DavidLPeng

  • Level 1 Member
  • *
  • Posts: 6
Are my files still intact?
« on: March 05, 2009, 10:22:26 PM »
I just purchased a new 1TB hard drive to compliment my existing 1TB hard drive (with files) currently residing in DNS-321 slot 2. I inserted the new drive into slot one without thinking and power up the device. Then when I got into the web UI, it ask me to reformat the drive in slot 2 and configure RAID type. Since I want to run RAID 1, I power down the device and swap the location of the drives. To my horror... my files are now gone missing. So I power down again and went with the original configuration. I leave the new drive out and just set it aside.

When I power back up, the hard drive is blinking but I still have no access to my files. Will I ever see my files again? Is there a way to recover it?

What is the suggested way to add 2nd drive and to configure RAID 1 without loosing my data?

Thanks.
Logged

DavidLPeng

  • Level 1 Member
  • *
  • Posts: 6
Re: Are my files still intact?
« Reply #1 on: March 05, 2009, 10:38:49 PM »
Okay... so when I soft rebooted from the web UI... (with only one drive as the original config...); I am able to access my files again. That's a big relief!!! Man.. that scares the heck out of me .. I can't afford to lose the data in it. :(
Logged

nrf

  • Level 2 Member
  • **
  • Posts: 97
Re: Are my files still intact?
« Reply #2 on: March 06, 2009, 04:28:47 AM »
losing your data? I recommend a backup scheme too. raid or no, your data can still be lost for any number of causes....
nrf
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: Are my files still intact?
« Reply #3 on: March 06, 2009, 09:23:04 AM »
Quote from: nrf on March 06, 2009, 04:28:47 AM
losing your data? I recommend a backup scheme too. raid or no, your data can still be lost for any number of causes....
nrf

Seconded
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

mig

  • Level 3 Member
  • ***
  • Posts: 217
Re: Are my files still intact?
« Reply #4 on: March 06, 2009, 09:58:51 AM »
Quote from: DavidLPeng on March 05, 2009, 10:22:26 PM
What is the suggested way to add 2nd drive and to configure RAID 1 without loosing my data?

see http://forums.dlink.com/index.php?topic=4559.msg26235#msg26235
Logged

DavidLPeng

  • Level 1 Member
  • *
  • Posts: 6
Re: Are my files still intact?
« Reply #5 on: March 06, 2009, 01:43:01 PM »
Right.. RAID 1 doesn't guarantee but I better off with RAID 1 than just storing those data in a single hard disk. Anybody doesn't agree? ;)
Logged

mig

  • Level 3 Member
  • ***
  • Posts: 217
Re: Are my files still intact?
« Reply #6 on: March 06, 2009, 03:25:34 PM »
Quote from: DavidLPeng on March 06, 2009, 01:43:01 PM
Right.. RAID 1 doesn't guarantee but I better off with RAID 1 than just storing those data in a single hard disk. Anybody doesn't agree? ;)
The only advantage, I can see, to RAID1 (over a single hard drive) is that your data
will remain available in the event of a single hard drive failure; otherwise RAID1 has
the same risks as a single hard drive solution.
« Last Edit: March 06, 2009, 03:34:55 PM by mig »
Logged

fordem

  • Level 10 Member
  • *****
  • Posts: 2168
Re: Are my files still intact?
« Reply #7 on: March 06, 2009, 04:06:24 PM »
The advantage of RAID1 is the reduced down time when a disk fails - the disadvantage of RAID1 is the loss of 50% of the available space
Logged
RAID1 is for disk redundancy - NOT data backup - don't confuse the two.

nrf

  • Level 2 Member
  • **
  • Posts: 97
Re: Are my files still intact?
« Reply #8 on: March 06, 2009, 06:11:04 PM »
before switching your device from single drive to raid I'd suggest taking a backup somehow.
nrf
Logged