• February 23, 2025, 09:41:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Mine's an 815 but I can't fine an 815 thread. Looks like an 825  (Read 4065 times)

yonze

  • Level 1 Member
  • *
  • Posts: 2
Mine's an 815 but I can't fine an 815 thread. Looks like an 825
« on: February 26, 2012, 02:49:38 PM »

I have had my 815 for several months.  One cable (used all day), another used occasionally for my wife's laptop, and one iPad on the wireless (used infrequently).  Occasionally the cable just cuts out.  Sometimes every few days, sometimes it is OK for a week or two.  Has done ever since I bought it. 

I reset it by switching off and on and it's OK.  Not a problem when I'm here but it sure would be if I were away and using GoToMyPc.

Any suggestions? 
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mine's an 815 but I can't fine an 815 thread. Looks like an 825
« Reply #1 on: February 26, 2012, 05:12:50 PM »

What Firmware version is currently loaded? Found on routers web page under status.

What ISP Service do you have? Cable or DSL?
What ISP Modem do you have? Stand Alone or built in router?
What ISP Modem make and model do you have?
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.
I would contact your ISP service and ask them to help you bridge the modem. If the modem can't be bridged then I would use the DMZ feature of the modem and input the IP address that the router gets from the Modem on put that in the modems DMZ.

Some things to try:
Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? You can find these under Status/Device Info/Wan section.
Turn off ALL QoS (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices on the router. Setup/Networking
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall if you have this option.

What wireless modes are you using?
Try single mode G or mixed G and N?
What security mode are you using? Preferred security is WPA-Personal. WPA2/Auto TPIK and AES.
What wireless devices do you have connected?
Any cordless house phones?
Any other WiFi routers in the area? Use InSSIDer to find out.
Turn off Short GI, WLAN Partiton and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless.

Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.

Check cable between Modem and Router, swap out to be sure. I recommend CAT6 and the shorter the better if possible. I use a 1 footer. Swap cable between modem and router. Sometimes these in box cables are not make well.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

yonze

  • Level 1 Member
  • *
  • Posts: 2
Re: Mine's an 815 but I can't fine an 815 thread. Looks like an 825
« Reply #2 on: February 29, 2012, 10:25:58 PM »

"I would contact your ISP service"

Much of the rest was gobbledegook to me, so I did.  They said "why not use our new combined modem/router?".  I did.  Plug and play. 

In the meanwhile the 815 went down twice today and the second time stayed that way.  Goes back to the shop tomorrow. 
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mine's an 815 but I can't fine an 815 thread. Looks like an 825
« Reply #3 on: March 01, 2012, 06:57:19 AM »

Enjoy. This is a user configuration issue and not a HW issue.
« Last Edit: March 01, 2012, 09:37:16 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.