Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[benjafut]

Hi guys,

I was wondering if you guys could give me a hand, in my firewall I have the following rules:

1    newserver              SAT     any     all-nets     core     wan_ip     servidorconpaq
2     servernew              NAT     any     all-nets     core     wan_ip     servidorconpaq
3     servernewallow     Allow     any     all-nets     core     wan_ip     servidorconpaq
4     Chatserversat     SAT             any   all-nets     core     wan_ip     openfireserver
5     ChatServer     NAT             any     all-nets     core     wan_ip     openfireserver
6     Axallow             SAT             any     all-nets     core     wan_ip     remotedesktop
7     ax_traffic_allow     NAT             any     all-nets     core     wan_ip     remotedesktop
8     marroco_SAT     SAT             any     all-nets     core     wan_ip     all_tcpudp
9  Marroco_traffic_allow  NAT     any     all-nets     core     wan_ip     all_tcpudp
10 Marroco_allow_traffic Allow     any     all-nets     core     wan_ip     all_tcpudp
11 allow_dns_forward     SAT             lan     lannet     core     lan_ip     dns-all
12     permit_dns     NAT             lan     lannet     core     lan_ip     dns-all

the first three rules are not applying,what I mean by that,the firewall is not opening the port 3391 I have added the other rules just fine but this one refuses to apply. What am I doing wrong? Does this firewall have a limit on Ip rules? I dont know where else to go.

I have added the service under the objects> system and I have added the ip(server to nat into) under object> interface addresses.

Thanks in advance!

[danilovav]

If you already had configured SAT+NAT, you don't need 3rd rule (allow), so you can remove it.
Please show details of service "servidorconpaq" you've created.
Please show details from rules you've created.