Was able to find this. Does it answer your question?
1.Found
here5 GHz : 16 dBm
2.4 GHz : 18 dBm
2. Found
here802.11a: -68dBm ± 2dBm@54Mbps
802.11b: -84dBm ± 2dBm@11Mbps
802.11g: -68m ± 2dBm@54Mbps
3. Found
hereSerial Num. = ?
FCC ID = KA2IR815A1
Industry Canada ID = 4216A-IR815A1
CPU Type =
Ralink RT3662FMIPS Rev = ?
CPU Speed = ?
Bus = ?
Flash Type = ?
Flash Chip = Macronix MX29LV320DBTI-70G
Flash Size = 4 MB
Max Firmware Size = ?
RAM Size = 32 MB
RAM Chip = ESMT M12L2561616A-6T
nvram Size = ?
ETH chip1 = Ralink RT3662
Switch = IC+ IP175D
Port-based vlan = ?
802.1q vlan = ?
Ethernet Port Count = 1-10/100-WAN 4-10/100-LAN
Wired Standard = IEEE 802.3/3u
Ethernet interface OUI = 5C:D9:98
boot_wait = ?
bootloader = ?
Flash Card Socket/Type = No
SD/MMC Mod Support = ?
Expansion IF types = ?
PoE = ?
Power = 5 VDC, 2.5 A
Connector type/size = Barrel plug, 2 mm (ID), 5 mm (OD), 10 mm (LEN)
LEDs/Color = ?
Size = (WxDxH): 6.2" x 4.7" x 1.2" (157.5mm x 119.4mm x 30.5mm)
USB = ?
Serial Port = Yes JB1(Rx sp 3v3 GND TX)
JTAG Port = Yes J1
Supported by TJTAG/Version = ?
Special Features = ?
Radio
Wireless Radio =
Ralink RT3662WLAN DSP processor = Ralink RT3662
Wireless interface OUI = 5C:D9:98
Antenna Connector Type = U.FL
MIMO status = 2x2:2
Wireless Standard = IEEE 802.11a/n
802.11n = up to 300 Mbp/s
802.11a = 6, 9, 12, 18, 24, 36, 48, 54Mbps
WiFi Operating Frequency = 5 GHz
Radio cor_rev = ?
Radio Capabilities = ?
Radio
Wireless Radio = Ralink RT3092
WLAN DSP processor = Ralink RT3662
Wireless interface OUI = 5C:D9:98
Antenna Connector Type = U.FL
MIMO status = 2x2:2
Wireless Standard = IEEE 802.11b/g/n
802.11n = up to 300 Mbp/s
802.11g = 6, 9, 12, 18, 24, 36, 48, 54 Mbp/s
802.11b = 1, 2, 5.5, 11 Mbp/s
WiFi Operating Frequency = 2.4 GHz
Radio cor_rev = ?
Radio Capabilities = ?
Other
Default IP address = 192.168.0.1
Default login user = admin
Default login password = blank
Default SSID = dlink, dlink_media
OEM = ?
3rd Party Firmware Support = ?