Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[nosky]

Hello,

I bought recently the DNS-320 on  pixmania.com
What is interesting:
- NAS has body from the DNS-320L
- Hardware is from the DNS-320
- Firmware is 1.0b (?)

Any attempt to upgrade the firmware to the latest version 2.x - fails. There is an error after loading the firmware to the NAS.

Can I ask you if that's okay?
Which firmware version is in my device?
What kind of equipment is it? (hardware from 320 and body from 320L).
Where can I find a compatible firmware for this device?

Thank you in advance for your help.
Best Regards,

Daniel

[albert]

I doubt DNS-320 board will fit into DNS-320L casing given that the latter has a smaller built. How did you determine the hardware is from DNS-320?

[nosky]

I think I was imprecisely - hardware is the same as the DNS-320.
I mean - the same is processor (CPU clock) and RAM (128MB).

However, the body is from DNS-320L - the USB port is on the back, but the "horizontal bar" is not silver but black.

[albert]

If I'm not wrong, your DNS-320 hardware is revision B1 and the latest firmware is 1.00b03. Thus the board used is not the same one from revision A which has the USB port in the front.

BTW, do you have picture of the circuit board?

[nosky]

Thanks for your response! :-)

I'll make a picture today and I'll send it here. (with firmware version)

[nosky]

Sorry for the lack of pictures. But I can confirm - it is actually B1 revision of the device.

As for the firmware - I have downloaded version you specified in one of your posts (and which is officially the latest version - by dlink.fr) and installed it in the NAS. The result - it turned out that I did downgrade of the firmware...

I used to have (originally uploaded):

07/12/2012

now I have:

04/26/2012

So, it was a downgrade... :-(
Now I can not find the newer version, which I originally had.

BTW, one problem still exists for me - I can not save configuration - configs file has 0 bytes. :-(
(ffp & debian are switched off)

[albert]

Sorry to hear that. What was your original firmware version before the upgrade? And what version does it display after the upgrade?

You might want to check with your local D-Link support and request for the latest release.

[JavaLawyer]

BTW, one problem still exists for me - I can not save configuration - configs file has 0 bytes. :-(
(ffp & debian are switched off)

Try saving the configuration file using a different browser. For example, some D-Link routers have issues properly saving configuration setting files using Firefox.

[nosky]

@ albert:
Originally it was version: 1.00 of 07/12/2012
Currently I have version: 1.00 of 04/26/2012
The device works and it is most important :-)
I don't think, that Polish service will have the firmware to the hardware which is dedicated to French market...
I'll wait for new firmware on official page.

@ JavaLawyer:
Thank you very much for your advice - it is possible. In the evening, will arrange test in IE and FF (so far have tested only in Chrome).