Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[besserpunk11]

Hi together !


currently I´m one step before the decission to throw everything away - I´m loosing nerves in assigning my DAP-2553 Access Point a Dynamic IP Adress via DHCP and it doesn´t work.

PLEASE HELP me, I will describe my problem in detail:

The DAP is not new, but it has been set to it´s factory defaults and it´s latest firmware is also running in it.
I´ve to change the default static IP which is 192.168.50 to dynamic IP.

Here it starts - HOME SCREEN


then I go to BASIC SETTINGS > LAN


after this I change the mode to DYNAMIC via drop down


static IP freeces, mode has been set to DYNAMIC, next step is CONFIGURATION > SAVE AND ACTIVATE


..a reboot is necessary


thereafter the device has got it´s new dynamic IP "192.168.100.250" from the DHCP server, this is apoved because I had to change the IP in the URL to reconnect to it...


and all other network information was delivered as well


so far so good - if i now RESTART or POWER DOWN the device, the IP is automatically set back to factory default 192.168.0.50.

I´ve tryed it many times, with an other DAP-2553 as well, also with chrome or IE9 - same result.

Can you tell me my mistake please? Or what should I do??

Thank you !
Stefan

[FurryNutz]

Is this DAP connected to a main host router. Can you connect it to a main host router and see if the DAP can pass thru a DHCP IP address from the main host router?

[besserpunk11]

This DAP is connected to a windows servér 2008r2 domain controller with a DHCP role, the main router is just for the internet connection. The DAP receives its reserved dynamic ip proper, i see a valid lease in the dhcp server

[FurryNutz]

What region are you located?
What FW version is currently loaded?

[besserpunk11]

FW: 1.27
Location: Austria

[FurryNutz]

Ok, I seems you have the latest FW.

I'll recommend that you phone contact D-Link support and ask for level 2 or higher support and see if this can be resolved.
http://www.dlink.com/de/de/support/contact