Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[avasile]

Hello everyone.
I will need your suggestion on how to access a Synology NAS behind a DIR-655.
I had it working but I messed with my router and of course no backup was saved so i cannot remember how to do it. I do this pretty often and I know it should be a virtual application but I cannot get it to work.

My settings:
- LAN IP of Synology; 192.168.100.76
- port is 5000
- I want to be able to use the same port when coming in from outside; if not we can try something else

Please advise.
Thank you.
AV

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• What ISP Modem service link speeds UP and Down do you have?

Any examples here help maybe?
http://forums.dlink.com/index.php?topic=56861.0

[avasile]

Hello and thank you.
It is a A4, version 1.32 NA
It is a cable box with mostly static IP address ( it changes once every 2-3 months).
I wish I can upload an image but I did not see how....

I have the same settings as in the example you mentioned but different port numbers.

[avasile]

Here is a screen of what the settings are

[FurryNutz]

What ISP Modem Mfr. and model # do you have? Just want to confirm that you don't have a double nat issue here...

Also

• Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test.

[avasile]

I missed your reply ...
I am running out of options here .... I even called Dlink support .... it was not fun but I gave since the tech had no idea.
To simplify things I setup FTP server on my server - so now I am trying to setup a simple rule that will open t FTP access to the laptop ... no luck.
 
I used both virtual server and port forwarding .... it seems that I cannot use both of them at the same time since they will conflict.

Help ....

[FurryNutz]

If your using any PF or VS features, disable uPnP and test again.

Ensure NAT is set for Endpoint Independent as well.