Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[amisdar]

Hi guys, here's my scenario:

I've set up VPN router at my office using DI-804HV with PPTP Server enabled. I followed the guide that I found here:

ftp://files.dlink.com.au/products/DI-804HV/REV_C/SetupGuides/VPN_WindowsXP_PPTP_to_DI-804HV_Setup_Guide_v2.0.pdf

The config parameter for the DI-804HV is as below:

IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Virtual IP of PPTP Server: 10.0.0.1

At home, my DIR-655 router is as below:

IP Address: 192.168.2.254
Subnet Mask: 255.255.255.0
DHCP Server: Enabled

From my PC, I have created the PPTP VPN dialer and I'm able to get connected to the VPN on my office. However, I can't access any resources or ping any computers located over there. Here's the dialer's parameter that I got once my VPN has been established:

Server Type: PPP
Transport: TCP/IP
Server IP Address: 10.0.0.1
Client IP Address: 10.0.0.2

What went wrong here? Thanks in advance :-)