• February 23, 2025, 06:02:06 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS-2310L not recording with DNR-322L  (Read 7760 times)

msaum

  • Level 1 Member
  • *
  • Posts: 8
DCS-2310L not recording with DNR-322L
« on: February 17, 2014, 12:00:13 PM »
DCS-2310L - Firmware 1.01.10
DNR-322L - Firmware 2.00 10/15/2013

I have two DCS-2310Ls that are no longer connecting and recording to the DNR-322L.  I've tried removing and re-adding them.  The DNR-322L tries to connect and then disconnects without a message.  I can connect to them just fine and stream video locally and through the DLink portal.  I can't connect to them through the DNR-322L in the portal, they show up with X's.  The DNR-322L is streaming fine from the DCS-2132Ls on the network. 

I can't see any errors in the logs, and I'm not sure where else I should look to find errors.

Any ideas on what I should check?

Mark
Logged

aditya1015

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-2310L not recording with DNR-322L
« Reply #1 on: April 11, 2014, 08:57:58 AM »
Ive got the same thing happening on my NVR except im using the 5020L cameras all the latest firmware etc..

pls help someone!!
Logged

chuckers

  • Level 1 Member
  • *
  • Posts: 14
Re: DCS-2310L not recording with DNR-322L
« Reply #2 on: April 11, 2014, 01:10:54 PM »
Quote from: msaum on February 17, 2014, 12:00:13 PM
DCS-2310L - Firmware 1.01.10
DNR-322L - Firmware 2.00 10/15/2013

I have two DCS-2310Ls that are no longer connecting and recording to the DNR-322L.  I've tried removing and re-adding them.  The DNR-322L tries to connect and then disconnects without a message.  I can connect to them just fine and stream video locally and through the DLink portal.  I can't connect to them through the DNR-322L in the portal, they show up with X's.  The DNR-322L is streaming fine from the DCS-2132Ls on the network. 

I can't see any errors in the logs, and I'm not sure where else I should look to find errors.

Any ideas on what I should check?

Mark

You should be using the 2.00B07 firmware released on 12/27/2013 - not 10/15/2013. I would try updating your DNR again to the latest 2.00B07 firmware and try to add those cameras again under "Setup>Camera Setup". Of course make sure the model selected is "2310". You can download the latest firmware here: ftp://ftp2.dlink.com/PRODUCTS/DNR-322L/REVA/DNR-322L_FIRMWARE_2.00B07.ZIP
And you can find a list of supported cameras here: http://forums.dlink.com/index.php?topic=56068.0

Are your cameras setup to use a static IP or are you using DHCP? Instead of streaming from the dlink portal, can you connect to the cameras IP address directly and stream the video that way?
Logged

msaum

  • Level 1 Member
  • *
  • Posts: 8
Re: DCS-2310L not recording with DNR-322L
« Reply #3 on: April 29, 2014, 12:26:09 PM »
It required that the cameras be rebooted after the firmware upgrade of the DNR-322L.  The issue is resolved.
Logged