• November 01, 2024, 11:22:12 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: QNAP TS 220 Not connecting to D-Link DSL-2750U  (Read 4384 times)

wilkenj

  • Level 1 Member
  • *
  • Posts: 2
QNAP TS 220 Not connecting to D-Link DSL-2750U
« on: May 07, 2014, 05:10:46 AM »

Greetings all

I recently move out my parents place. I took the NAS with but the router had to stay. So I got provided a D-Link DSL-2750U by my service provided

I have tried both static ips aswell as using the DHCP neither is working I have chect the ethernet port and cable by using a laptop.

right now the configuration is

router
IP Address:   192.168.1.1
Subnet Mask:   255.255.255.0

nas
IP Address:   192.168.1.200
Subnet Mask:   255.255.255.0


There are no IP conflicts that I am aware of.
the NAS Lan LED on front flashes yellow every 4 second on the back at the Ethernet LED flash yellow every 4th second and 2 green flashes in that same second.
The Router does not even flash to show that a Ethernet net cable is plugged in

Connecting the NAS directly to PC (192.168.1.33) works, however this is not ideal I want the NAS accessible from my wireless devices.

I have run out of ideas please advise where to from here......
Thanks in advance.

 
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QNAP TS 220 Not connecting to D-Link DSL-2750U
« Reply #1 on: May 07, 2014, 07:18:04 AM »

Link>Welcome!

  • What Hardware version is your modem? Look at sticker under modem.
  • Link>What Firmware version is currently loaded? Found on the modems web page under status.
  • What region are you located?

Do other devices connect to the modem and gain access to Internet services?

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

wilkenj

  • Level 1 Member
  • *
  • Posts: 2
Re: QNAP TS 220 Not connecting to D-Link DSL-2750U
« Reply #2 on: May 11, 2014, 11:00:42 AM »

Thanks for the Welcome note.

And thanks for the response

  • Hardware Version: Material Number: 6004343 P/N ISL2750UF1K0211E
  • Current Firmware Version: AF_1.65_R01
  • Previous Firmware Version: AF_1.68_T0
  • Region: South Africa(don't know what Region possibly of EMEA)

Yes I have connected a laptop via Ethernet port to ensure the port and cable I was using on the NAS was fine. Yes this laptop was able to connect.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QNAP TS 220 Not connecting to D-Link DSL-2750U
« Reply #3 on: May 12, 2014, 07:49:06 AM »

I would presume that if other devices and the same cable used are connecting to the Internet correctly, I would check the networking configuration on the NAS to ensure it's correctly set up. You'll need to refer to the Mfrs web site for support and information regarding it's settings.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.