• November 28, 2025, 01:17:35 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: QOS not working Properly  (Read 11560 times)

hyelton

  • Level 3 Member
  • ***
  • Posts: 142
    • HuntersPad
QOS not working Properly
« on: April 02, 2014, 10:52:16 AM »
So I figured out why I was having an issue of HIGH ping while uploading and downloading at the same time. Check it out. I have a 2meg upload, but why is my 2 meg upload being MAXED out while QOS is on? Thats why I had high ping on my DGL-4500 cause QOS is not throttling my upload like it should.


Its also very odd QOS seems to work when not downloading, But as soon as I start a Download or a YouTube Video the QOS stops working maxes out my upload and causes high ping

« Last Edit: April 02, 2014, 11:01:47 AM by hyelton »
Logged
Current PC: MSI GE60, 128GB m-Sata, 750GB HD, 8GB Ram, Nvidia 2GB 650m, Windows 7 Pro.

Current Phone: Sony Xperia ZL

Internet Speed: 25Mb Down, 2Mb Up
Current Router:) : D-Link 826L

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QOS not working Properly
« Reply #1 on: April 02, 2014, 11:15:04 AM »
Well you set a manual uplink speed...
What happens if you set a automatic UPLink speed?
What happens if you set a manual 1024Mb UPLink speed?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

hyelton

  • Level 3 Member
  • ***
  • Posts: 142
    • HuntersPad
Re: QOS not working Properly
« Reply #2 on: April 02, 2014, 11:24:28 AM »
Quote from: FurryNutz on April 02, 2014, 11:15:04 AM
Well you set a manual uplink speed...
What happens if you set a automatic UPLink speed?
What happens if you set a manual 1024Mb UPLink speed?

Auto Uplink is worse as it will put 2100 as my uplink speed.

Manual to 1024 slows my upload down correctly but slows it down to only 1meg Right now I have it set to 1600 and its okay ish but 1600 and works like it should at 2000
Logged
Current PC: MSI GE60, 128GB m-Sata, 750GB HD, 8GB Ram, Nvidia 2GB 650m, Windows 7 Pro.

Current Phone: Sony Xperia ZL

Internet Speed: 25Mb Down, 2Mb Up
Current Router:) : D-Link 826L

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QOS not working Properly
« Reply #3 on: April 02, 2014, 11:26:04 AM »
Retest again with Dynamic Defrag disabled. Thats only for ISP servcies less than 1Mb I believe. I never used it.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

hyelton

  • Level 3 Member
  • ***
  • Posts: 142
    • HuntersPad
Re: QOS not working Properly
« Reply #4 on: April 02, 2014, 11:28:16 AM »
Quote from: FurryNutz on April 02, 2014, 11:26:04 AM
Retest again with Dynamic Defrag disabled. Thats only for ISP servcies less than 1Mb I believe. I never used it.

I`ve tested it before and just tried it again with no change.  I`m gonna put it at 1600 for now.
Logged
Current PC: MSI GE60, 128GB m-Sata, 750GB HD, 8GB Ram, Nvidia 2GB 650m, Windows 7 Pro.

Current Phone: Sony Xperia ZL

Internet Speed: 25Mb Down, 2Mb Up
Current Router:) : D-Link 826L

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QOS not working Properly
« Reply #5 on: April 02, 2014, 11:30:11 AM »
Did you do a full reboot after disabling Dyn Defrag?

Keep us posted.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QOS not working Properly
« Reply #6 on: April 02, 2014, 11:35:31 AM »
Interesting, I found a v1.24WW here:
http://tsd.dlink.com.tw/downloads2008detailgo.asp
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

XS

  • Level 4 Member
  • ****
  • Posts: 390
Re: QOS not working Properly
« Reply #7 on: April 09, 2014, 05:56:42 AM »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QOS not working Properly
« Reply #8 on: April 09, 2014, 07:30:47 AM »
No. I've asked. I tried to load it but it fails to load.  :-\
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Fumz

  • Level 1 Member
  • *
  • Posts: 14
Re: QOS not working Properly
« Reply #9 on: May 25, 2014, 11:45:53 AM »
Quote from: FurryNutz on April 02, 2014, 11:35:31 AM
Interesting, I found a v1.24WW here:
http://tsd.dlink.com.tw/downloads2008detailgo.asp

Any idea what the difference is between DI, DNA, and WW?

I'm having some issues with my 4500 that seem to revolve around wireless... I'm on 1.15.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: QOS not working Properly
« Reply #10 on: May 25, 2014, 11:52:41 AM »
Keep with the Current FW version you have for now and lets troubleshoot the issue first:
http://forums.dlink.com/index.php?topic=59489.0

If your in the NA region, only use NA region FW.

Quote from: Fumz on May 25, 2014, 11:45:53 AM
Any idea what the difference is between DI, DNA, and WW?

v1.24 only fixes a Samsung phone issue and is not currently supported or working for NA units. I've asked about it and haven't heard anything more about that version.

I'm having some issues with my 4500 that seem to revolve around wireless... I'm on 1.15.
« Last Edit: May 25, 2014, 01:04:31 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.