• November 01, 2024, 05:21:33 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DAP 3410 P2P link Problem  (Read 9919 times)

unleashed333

  • Level 1 Member
  • *
  • Posts: 1
DAP 3410 P2P link Problem
« on: April 27, 2014, 02:31:41 AM »

Greetings All

I have two DAP 3410 configured in WDS mode and having each opposite MAC Address in Wireless Settings,but still it is not working.

Building A
INTERNET ROUTER(192.168.2.1)---DAP 3410(192.168.2.50)

Building B
DAP 3410(192.168.2.51)---Access Switch

Can any one please help me in this problem.Thankyou
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DAP 3410 P2P link Problem
« Reply #1 on: May 01, 2014, 07:37:04 AM »

Link>Welcome!

  • What Hardware version is your DAP? Look at sticker under the DAP.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Can be anything and not something that's already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
  • What wireless modes are you using?
  • 2.4Ghz DAPs only: Try single mode G or N or mixed G and N?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • What wireless devices do you have connected?
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
  • Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?

Does the DAPs connect if you temporarily disable all WiFi secure modes just to test? Turn back on after test.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DAP 3410 P2P link Problem
« Reply #2 on: August 06, 2014, 12:54:23 PM »

Any status on this?  ???

Greetings All

I have two DAP 3410 configured in WDS mode and having each opposite MAC Address in Wireless Settings,but still it is not working.

Building A
INTERNET ROUTER(192.168.2.1)---DAP 3410(192.168.2.50)

Building B
DAP 3410(192.168.2.51)---Access Switch

Can any one please help me in this problem.Thankyou
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.