Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[warheadbr]

  hellp started 4 days ago it was functioning just fine now its just a brick.
  i restored
formated
updated
got a brand new Sd card
and remade my full network
  everytime i insert the SD card it stop working, or freeze, or lose the conection
 need help here please lost my receipt so i cant even return the camera

[Maxmon]

The same happens with my 3 cameras (942L and 5222)
I assume is a firmware bug
I pulled out the sd card and I works I insert and wifi camera becomes frozen
Really a bad behavior. Waiting for a firmware update

[georgeorgeorge]

Turn off recording and reset the camera.

Insert memory card cold, ie without power,

Power up

Format card.

If it formats ok then turn on record continous and test

[noniq]

I have the same problem: Today my camera suddenly wasn’t accessible via WLAN anymore. Several reboots didn’t help – I could only access the camera if I plugged in a LAN cable. Finally I found this thread, removed the SD card – and eventually WLAN was working again.

To make sure, I then unplugged the LAN cable and started pinging the camera’s IP: As soon as I inserted the SD card, the camera stopped responding. Removing the SD card again made no difference, I had to reboot the camera to make it work again (reproduced several times).

I tried to reformat the SD card in my iMac – still didn’t work. Finally I once again connected to the camera using a LAN cable and reformatted the SD card via the „SD management“ section of the camera’s admin interface, but to no avail: As soon as I unplugged the LAN cable, with the SD card still inserted, the camera stopped responding. I also tried disabling “SD recording” completely, but this didn’t help either.

Some more notes:
 * During my experiments today I upgraded the firmware from 1.12 to 1.23 – made no difference.
 * The SD card originally was quite full (200MB of 16GB remaining), but this was expected as I had SD recording configured to “Keep Free Space: 200 MB”

So for now I just use the camera without SD card. But I would be REALLY interested in the cause of this bug. And a fix, of course.

[dkm584]

Thanks to all for posting this issue. I am having this same problem. I have 3 dcs-942L wireless cameras that would lose wireless connectivity intermittently. I would unplug/plug, get the connection working but later in the day, the camera would lose connection again. After I took out the SD card, all 3 cameras have not lost connection for over for a day now. I will leave the SD card out for now!

I did format the cards before using them to record. I also did upgrade the firmware. All 3 cameras are brand new. I have a 4th camera that is wired, and I left the SD card in. The wired camera is working fine. No issue.

Many thanks for posting this issue!! So far so good!

[RYAT3]

Are you using an extension cord? How long are they?
Class 10  cards?

[dkm584]

If you are asking me: I am not using any extension cords. I was using SanDisk Ultra 32GB MicroSDHC Class 10 UHS Memory Cards.

I appreciate any suggestions! Thanks!

[dougg]

My camara came that way from the beginning,  when I put in most SD Cards the wifi stops or wont work,  I only found 1 SD Card that will work a Micro Center 8GB class 4, I tried many others with no success.   I would guess a hardware failure and mine was failed from the factory.   but the 8G card is enough for my needs.  I have also done all the firmware updates with no change

[dkm584]

Thanks dougg!