Hi,
I have a D-Link 5020L that had been happily serving up images of my sump pump and machine room. I didn't use the PTZ features often and like others had issues with a firmware update that happened to break that functionality. I saw a newer firmware was available and flashed it as it was supposed to fix my issue. Here's where things got odd.
After the flash the camera booted normally but now instead of having the static IP assigned to it, it had that and the IP of another host on the network. First thought was I was going mad but after eliminating that I started troubleshooting. I did the usual reset, unplugged the camera for awhile, reflashed over a wired connection, re-downloaded the firmware, reset the camera a few times and tried to set it up cleanly. Regardless of the action I take, the camera always ARPs it's MAC address with whatever IP it's been assigned AND another IP.
For example, after I reset it, it should have had 192.168.0.20. I can confirm that it had that address easily. If I change my IP to be something in the other subnet, lo and behold it's alive on that subnet as well, with an entirely different IP. This happens wired and wirelessly. I'm guessing that something has become munged in the config and I would ideally like to clear that out so I can use the bloody thing again. I've also noticed that even after a factory reset it still maintains my wireless SSID and in a couple cases it retained the PSK as well. Is there some kind of deeper reset for these cameras similar to the tftp method you find with other devices? My searching hasn't turned up anything useful at this point.
Thanks!
Author
Topic: Oddities after firmware upgrade (Read 4156 times)