• February 22, 2025, 10:08:46 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Two HDDs but only 1 is recognized  (Read 6971 times)

marcelotdesa

  • Level 1 Member
  • *
  • Posts: 5
Two HDDs but only 1 is recognized
« on: August 03, 2015, 08:54:15 AM »

Hi, I have 2 HDD in DNS-327L and one stopped being recognized. The two front lights of the HDDs are white. In System Status menu/Hard Drive Info appears two HDDs, but on My Files only one. I've changed the hard drives position and nothing.

The HDD that stopped I used for P2P and was functioning normally. When I turn on the DNS I can hear the two HDD being recognized.

Hard Drive Info:
Disk1, SAMSUNG, SAMSUNG HD203WI
Disk2, SAMSUNG, SAMSUNG HD103SJ

If I click on the status the information displayed are almost the same for both.

Eu estou usando o último firmware DLINK_DNS327L.1.03b03(3.13.0722.2014)

Thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Two HDDs but only 1 is recognized
« Reply #1 on: August 03, 2015, 09:15:47 AM »

What happens if you swap drive bay positions?  ???
 
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

marcelotdesa

  • Level 1 Member
  • *
  • Posts: 5
Re: Two HDDs but only 1 is recognized
« Reply #2 on: August 03, 2015, 09:26:37 AM »

What happens if you swap drive bay positions?  ???

Nothing different happens, still recognizing only one of them.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Two HDDs but only 1 is recognized
« Reply #3 on: August 03, 2015, 09:28:38 AM »

So if you only use one drive at a time, is each drive seen by the DNS separately in either bay?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

marcelotdesa

  • Level 1 Member
  • *
  • Posts: 5
Re: Two HDDs but only 1 is recognized
« Reply #4 on: August 03, 2015, 10:39:03 AM »

So if you only use one drive at a time, is each drive seen by the DNS separately in either bay?

It's a good attempt. I had to go to work, but I will do this test later and post here.
Thank you.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Two HDDs but only 1 is recognized
« Reply #5 on: August 03, 2015, 10:46:06 AM »

Ok just want to make sure each drive is seen. There maybe a problem with the unit and a phone call to D-Link support maybe needed...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

marcelotdesa

  • Level 1 Member
  • *
  • Posts: 5
Re: Two HDDs but only 1 is recognized
« Reply #6 on: August 06, 2015, 08:17:24 PM »

Ok just want to make sure each drive is seen. There maybe a problem with the unit and a phone call to D-Link support maybe needed...

I apologize for the delay, leaving only one HDD, what worked is still Ok but the other does not.
Logged

marcelotdesa

  • Level 1 Member
  • *
  • Posts: 5
Re: Two HDDs but only 1 is recognized
« Reply #7 on: August 07, 2015, 06:15:40 AM »

How can I test the HDD via USB in any computer with this formatting is made by DNS? I have a Windows 10 machine and a Mac.

Thanks again
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Two HDDs but only 1 is recognized
« Reply #8 on: August 07, 2015, 07:04:21 AM »

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.