Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[swobo]

After installing and starting a syslog server, it quickly became flooded with messages about DNSSL:
"DNSSL suffix cgocable.ca received on br0 from fe80::56b8:aff:fe36:ed1e is not advertised by us". The interval is about 5 seconds. I tried to add the suffix to the Local Domain Name field of the Network tab, to no avail. I disabled the syslog option for now. Any clue?
The firmware is v1.08B03. I am based in NA. This is for a home usage. I work in IT Security.

[FurryNutz]

Link>Welcome!

• Has a Factory Reset been performed?
• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

  Link> >FW Update Process

• Was the router working before any firmware updates?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Seems like something in being queried in Canada? 

That's an IPv6 address. Set IPv6 to Local Only connection and test again? Can you find if this address is coming from the WAN or LAN side?

Was a factory reset performed before and after updating to v1.08 then set up from scratch?

[swobo]

Link>Welcome!

• Has a Factory Reset been performed?

Negative

• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

  Link> >FW Update Process
Negative

• Was the router working before any firmware updates?

Affirmative

Internet Service Provider and Modem Configurations
Cogeco Cable

• What ISP Service do you have? Cable or DSL?

Cable

• What ISP Modem Mfr. and model # do you have?

Seems like something in being queried in Canada? 
Yup. Appears to be life north of the 45th parallel
That's an IPv6 address. Set IPv6 to Local Only connection and test again? Can you find if this address is coming from the WAN or LAN side?
I am not using IPv6.

Was a factory reset performed before and after updating to v1.08 then set up from scratch?
Negative

Thanks. I will do my homework based on your reply and come back to you on this issue.

[FurryNutz]

• Has a Factory Reset been performed?

Negative

• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

  Link> >FW Update Process
Negative
Please follow the FW update process for doing any FW updates.

• Was the router working before any firmware updates?

Affirmative
What version did you have loaded prior to upgrading to v1.08?

Internet Service Provider and Modem Configurations
Cogeco Cable

• What ISP Service do you have? Cable or DSL?

Cable

• What ISP Modem Mfr. and model # do you have? Please confirm this model# info.

Seems like something in being queried in Canada? 
Yup. Appears to be life north of the 45th parallel
That's an IPv6 address. Set IPv6 to Local Only connection and test again? Can you find if this address is coming from the WAN or LAN side?
I am not using IPv6.
Be sure to set the router to Local Connection Only ON the router.

Was a factory reset performed before and after updating to v1.08 then set up from scratch?
Negative
Please follow the FW update process for doing any FW updates.

[swobo]

I went from the least demanding suggestion first. I set the IPv6 param. to Local Connection Only and it did the trick. Problem solved. Annnd I will keep in mind about rigorously follow the procedure for FW upgrade. Thanks a lot again.

[FurryNutz]

Awesome. Maybe at some point you can try v1.09 when you have time.

Enjoy.