• October 31, 2024, 08:42:47 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNS 325 Failed, I want to put the drives in a new enclosure  (Read 3202 times)

Florbid

  • Level 1 Member
  • *
  • Posts: 24
DNS 325 Failed, I want to put the drives in a new enclosure
« on: January 08, 2016, 01:46:51 PM »
Hi,

I have a raid 1 configuration (mirroring) and want to find out if i can take the drives out of the old DNS 325 that has failed and put it in another NAS.

If so, any ideas which one will support it.

If not, how do i get the data off the old drives...

Thanks in advance

Nigel
Logged

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: DNS 325 Failed, I want to put the drives in a new enclosure
« Reply #1 on: January 08, 2016, 02:59:22 PM »
The only way to be sure that the drives are usable by just plugging them in is to use another NAS box of the same make and model and series with the same firmware level.

From your questions I assume you don't have a recent backup - if you did it would just be a matter of plugging the drives into the new NAS, formatting them as RAID 1 and restoring from the backup.

With no recent backup you should read the 'recovering data' sticky at the beginning of the forum and since you have RAID 1 you only need to use one drive (the other is an exact copy).
Logged