Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[tubiwityu]

Dear Brother and Sister

I am thama from Indonesia.
I have old DLINK DIR-615,
on Tuesday, 02 August 2016, I did the firmware update on the DIR-615 device automatically listed on the menu firmware. Once the firmware update has been completed, the DIR-615 device requires a reboot for 60 seconds. After rebooting, the power indicator light (color: orange) is always on. and on the menu network connection on my laptop there is no WIFI list of the device.

I've opened a lot of tutorials, how to reset.
Starting from the press the reset button for 30 seconds to connect a LAN cable to the laptop with the DIR-615 device, but no results at all. There is no IP on the device, the default gateway is not there, so I can not connect between the laptop and the device to reset the settings.

What should I do?

I need your help

Thanks Before and After

Regards

thama

[FurryNutz]

Link>Welcome!

Can try this:
 Emergency Recovery Mode

If this doesn't work or fails, you'll need to phone contact your regional D-Link support office.

Please use this to do any future updates with D-Link routers:
Link> >FW Update Process

[tubiwityu]

I've tried the tutorial you suggested to me, but I failed.
the current DIR-615 device, the indicator light (orange) is flashing.
permasalahanya I can not get into the device, because I can not log into ipaddress of the device. 192.168.0.1 not found,
there anything I can do? Please help

[FurryNutz]

You did set a static IP address on the LAN wired PC and then tried to get to the 192.168.0.1 address in a browser after performing the start up actions listed in the procedure?