Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Xanatos82]

Hi! I've an old DSL-300T, and yesterday I was trying to make an upgrade of the firmware (on the router there still was the original one).
Obviously, the upgrade went wrong, and now my DSL-300T is bricked. If I connect it to the power, I can see only the power led and obviously the router doesn't reply to the ethernet connection.
What can I do to restore it?
If I try to load a new firmware with TiUpgrade I have this error:
"Script error:FTP Timeout!
The device address is 10.8.8.8.
Please change your machine IP address for the same subnet, and then re-running this utility"
I have the same message if I set my LAN with a static ip with:
IP: 10.8.8.9
Subnet Mask: 255.255.255.0
Gateway: 10.8.8.8

or

IP:192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
(I'm using a notebook with W10 - 64bit)

[FurryNutz]

What region are you located?
Might try this and see:
Emergency Recovery Mode

[Xanatos82]

NYC
I tried everything (also what you linked) ... even with TiUpgrade, but the router seems that It doesn't want to communicate with my pc

[RYAT3]

NYC
I tried everything (also what you linked) ... even with TiUpgrade, but the router seems that It doesn't want to communicate with my pc

Does any of this help? 
http://www.dlink.com/uk/en/support/product/dsl-300t-adsl-ethernet-modem

http://www.dlink.com/uk/en/support/faq/modems/dsl-modems/dsl-series/my-dsl-300t-dsl-320t-is-not-working-with-windows-vista-is-it-broken

http://www.dlink.com/uk/en/support/faq/modems/dsl-modems/dsl-series/how-do-i-reset-my-adsl-ethernet-modem-back-to-factory-default-settings

[FurryNutz]

I presume if you have tried everything including the links RYAT posted, the modem is probably bricked for good and needs to be replaced. 

NYC
I tried everything (also what you linked) ... even with TiUpgrade, but the router seems that It doesn't want to communicate with my pc