Firmware: v1.01 B07 11/11/2016 NA Region!Revision Info:Problems Fixed:1. Fixed Security issue for "TCP Off-Path Vulnerability CVE-2016-5696".
2. Fixed for "mistake in the Helpful Hints about file format"
3. Fixed SSID caused the devices cannot be set properly.
4. Fixed mydlink reported an issue for DCS-2530L that the timestamp of acs header is wrong.
5. Fixed for "The screen didn't refresh after successfully delete recording clip.", modfiy the NIPCA CGI 3.7.5 /config/sdcard_delete.cgi response status.
6. Fixed motion sensitivity cannot be set correctly many times via NIPCA CGI.
7. Fixed "The default value of level bar is incorrect.", modify the default Sound Detection level at 70dB.
8. Modify the /audio/ACAS.cgi default response MU-LAW audio format for DCS-2530L.
9. Modify the memory management that would cause webserver have crash problems, when use mydlink app and request as follow cgi command.
/cgi/admin/adv_snapshot_cont.cgi
/cgi/admin/recorder.cgi
10. Modify the NIPCA time zone id follow spec 1.9.8
11. Solve the camera will broadcast INVALID-XXXX (last four digits of MAC address) problem.
12. Fixed the camera will continue to cycle from day/night mode issue.
13. Fixed the camera setting static IP via Web UI setup wizard does not apply problem.
14. Fixed the IP camera name and label name have a lot of special characters problems.
New Features:1. Update agent version to 2.1.0-b42
2. Upgrade the OpenSSL version to v1.0.2j
3. Support mydlink UID feature.
4. Support IE Browser with digital zoom in/out function.
5. Support ONVIF v16.01.
D-Link posted DCS-2530L Rev A firmware which can be downloaded here:
DCS-2530L.
NOTE: Be sure that your wireless signal on the main host router is good and signal is strong with the camera if it's connected wirelessly before upgrading FW.
Please post your comments and observations as a reply to this thread.
Author
Topic: New - DCS-2530L - Firmware Version v1.01 B07 - Comments & Observations (Read 7443 times)