Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[abeNdorg]

Hardware Version: B1
Firmware Version: 1.08 05/15/2009
Software Version (Easy Search): 4700
Harddrive 1: ST31500341AS
Harddrive 2: ST31500341AS
Problem Type:  □ Function does not work
Problem Description: Trying to configure my gmail account for email notification, when I run a test I just get a popup window "sending...." "waiting on dns323's ip address" that never goes away.
Function Tested: E-MAIL ALERTS
Test Procedure (steps to reproduce): I used the gmail settings from the website (http://mail.google.com/support/bin/answer.py?answer=13287) and noticed an option I could not set on the DNS323 - Use STARTTLS: Yes (some clients call this SSL) - is this just automatic on the DNS323, or not yet an option on the dns323? I did try the 2 ports noted 465 and 587, neither made a difference. Even tried it again after a powercycle, no luck.

Thanks!

[Poopkiller]

Can say it works in 1.07. I'm waiting for the official release before installing 1.08.
I'm using the GMAIL SMTP settings for email alerts.

[abeNdorg]

Which port do you use for that configuration on 107?

[nohelp]

Worked for me.

Login method:Account
Username:gmail acount
Password:password
Port:587
smtp server:smtp.gmail.com
sender email:gmail account
reciever email: anything
check smtp authentication

[Poopkiller]

No port settings on configuration in 1.07.

[rws8258]

abeNdorg,

I realize this does not apply to F/W above 1.07, but take a look at the following detailed steps:

• http://forums.dlink.com/index.php?topic=4788.msg35433#msg35433

Let me know if this doesn't work. (I'm considering upgrading to F/W ver. 1.08b05 and I'll post my results here.)

Also, make sure you have enabled POP/SMTP in your GMail account's settings. GMail does not see my I.P. Addresses behind my router... It only sees my router's I.P. Address.