• February 23, 2025, 07:02:38 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DFL-210 IPSEC VPN problem  (Read 8387 times)

ionflex

  • Level 1 Member
  • *
  • Posts: 4
DFL-210 IPSEC VPN problem
« on: July 21, 2009, 05:47:01 AM »
I'm having problems with an ipsec lan to lan connection. When initiating the connection from the other end it works, but when initiating the connection from the dlink side the negotiation fails.

Log entry when connecting from other end (works):


Log entry when connecting from dlink end (fails):


What puzzles me is the local_peer=127.0.0.1 when connecting from the dlink side.
Firmware version is 2.20.03.08-8260 Sep 26 2008.

Any suggestions?
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: DFL-210 IPSEC VPN problem
« Reply #1 on: July 22, 2009, 10:33:25 AM »
If you manually specify the IPsec ID does it work then?
Logged
non progredi est regredi

ionflex

  • Level 1 Member
  • *
  • Posts: 4
Re: DFL-210 IPSEC VPN problem
« Reply #2 on: July 23, 2009, 07:55:40 AM »
How do I manualle specify the IPsec ID?

I have tried setting Loacal ID Type: IP and Local ID Value: 213.xxx.xxx.205 in the Authentication-tab
Still no luck.
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: DFL-210 IPSEC VPN problem
« Reply #3 on: July 23, 2009, 10:32:08 AM »
Do you still get log entries like what you sent me with that local ID set?
Logged
non progredi est regredi

ionflex

  • Level 1 Member
  • *
  • Posts: 4
Re: DFL-210 IPSEC VPN problem
« Reply #4 on: July 24, 2009, 05:45:15 AM »
Yes, exactly the same.
Logged

Fatman

  • Level 9 Member
  • ****
  • Posts: 1675
Re: DFL-210 IPSEC VPN problem
« Reply #5 on: July 24, 2009, 08:47:09 AM »
The IPsec ID you chose shouldn't be a big issue in the first place, perhaps setting a DNS or e-mail ID might provide some relief.

Failing that I am going to ask that you call TS as you don't have an easy answer and there is going to be a level of troubleshooting involved.
Logged
non progredi est regredi

ionflex

  • Level 1 Member
  • *
  • Posts: 4
Re: DFL-210 IPSEC VPN problem
« Reply #6 on: August 17, 2009, 06:02:29 AM »
I have experimented a little with the router lately. I reset the device to factory settings and set up a vpn link as per chapter 9.2.1. IPsec LAN to LAN with Pre-shared Keys (manual version 1.07). It seems no matter what I do, I get local_peer=127.0.0.1 when initiating the connection from the dlink side.

Am I missing something? Is there a simple step by step guide to set up a vpn link that should produce a correct handshake?
Logged

scrubsguy

  • Level 2 Member
  • **
  • Posts: 79
  • Blame it on the guy who can't speak english
    • NTCS
Re: DFL-210 IPSEC VPN problem
« Reply #7 on: July 21, 2011, 10:30:53 PM »
is this device also configured as your Router? when i setup my vpn account on this device i found it gave me hassles with open vpn, and then the moment i setup a separate router and connected it to my wan port on the dfl-210 it worked immediately.
Logged
skype me! pietta09

danilovav

  • Level 4 Member
  • ****
  • Posts: 424
  • Alexandr Danilov
Re: DFL-210 IPSEC VPN problem
« Reply #8 on: July 22, 2011, 07:58:07 PM »
What F/W versions on devices?
(some regional versions have limited encryption)
Check, you have no other dynamic IPsec, PSK are the same, security profiles are equal
Logged
BR, Alexandr Danilov