Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bkmps3]

G'day everyone.

I have an 882 running FW 1.20.

I have a total of 5 Google mini's in my home. 4x Gen 2's and 1x Gen 1.

When these devices are connected to the wifi (smart connect disabled, 2.4ghz band used) I experience random restarts of the 882. 5 or 6 times a day. Since disconnecting them the router has been up for 2 days.

Is there any known issues with these or something I can try?

Cheers

[FurryNutz]

Link>Welcome!

• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
• Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
• Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
• What wireless devices and total devices do you have connected?

What happens if you turn OFF all but 1 or 2 of the Minis and check operation with the router?
Enable Smart Connect and test.

• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

  Link> >FW Update Process