• February 26, 2025, 11:52:51 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Help Please- DLINK RAID volume missing  (Read 2751 times)

simonkp

  • Level 1 Member
  • *
  • Posts: 1
Help Please- DLINK RAID volume missing
« on: September 24, 2009, 07:11:57 AM »
Hi
I have a Firmware DNS-323 with firmware 1.06. I have  the below 2 drives.
Slot   Vendor   Model   Serial Number   Size
1   Seagate   ST3500320AS   9QM13RP6    500 G   
2   Seagate   ST3500320AS   9QM13T0W    500 G

The configuration was Raid 1 on volume 1 and  JBOD on Volume 2.    

Today I found that my DNS Lights were not working. when I pressed the button it switched on but I am not able to see the Volume 1 (Raid1).

HARD DRIVE INFO :
Total Drive(s):    2

Volume Name:    Volume_2
Volume Type:    JBOD
Total Hard Drive Capacity:    178084 MB
Used Space:    67619 MB
Unused Space:    110464 MB
-----------------------------------------
When I try to manually map the volume 1 it shows one folder on the drive and no files. All my data is gone!
And the mapped drive in windows shows 45.7 G free of 72 G.

Can any one help me here to understand what happened here and to restore my data?

Appreciate your help

Thanks,
Simon
Logged

hilaireg

  • Level 3 Member
  • ***
  • Posts: 348
Re: Help Please- DLINK RAID volume missing
« Reply #1 on: September 26, 2009, 10:01:55 AM »
Try mounting each HDD using EXT2FSD (http://www.ext2fsd.com); this may allow you to obtain a copy of your data ... alternatively, you will need to rebuild your RAID and restore your files from your external backup source.

Few other items:

  • Update the firmware to the latest non-BETA version
  • Use the Seagate HDD Diagnostic tool to verify each HDD (in 'Read Only' state if you haven't recovered the data)

HTH,
Logged