• February 22, 2025, 03:18:22 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Opening Ports  (Read 9011 times)

newgame99

  • Level 1 Member
  • *
  • Posts: 2
Opening Ports
« on: January 22, 2010, 09:10:48 AM »
I need the following ports opened for my VOIP Application: 13000-13001,5060-5061,6060-6061 (UDP), so what I did was go to the Port Forwarding section and filled in the appropriate fields.  However, it does not open the ports.

I disconnected the router (dir-601) and connected my computer directly to the internet and the VOIP Application worked, and the ports were OPEN. 

However, when I plug in the router, the ports are blocked even though I told it not to. 

Does anyone know the solution to this?
Logged

jerrry94087

  • Level 1 Member
  • *
  • Posts: 16
Re: Opening Ports
« Reply #1 on: January 22, 2010, 01:01:24 PM »
I use port forwarding all the time and it works.

Except for filling in information you should also check the box on the left to enable this forwarding.
Logged

newgame99

  • Level 1 Member
  • *
  • Posts: 2
Re: Opening Ports
« Reply #2 on: January 24, 2010, 06:53:51 PM »
I decided to call tech support and after 1.5 hours of talking to tech support level 1 and 2, they couldn't find out the problem.  So they transferred me to level 3, and he was able to do a new firmware flash, that is not available on the website because it is still in testing according to the guy at level 3 and that fixed my problem. 

Logged