Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[coolt2]

I've been looking around trying to find how to do this. I've read many forums, now i am confused.

I got 2 Dir 655 routers. theres a Family (#1)router. and there is a (#2)router for my room.
(map) modem---(#1)router (2 computers use this router) another port goes to my (#2)router. what is connected to (#2)router is. My computer, my TV. PS3 and i have a Wii which is wireless.

so what i want is. both routers to have internet access.
and i want my room to network itself so i can watch videos, recorded TV show. pictures.
i also want if possible. From my room computer thats connect to (#2)router networking with the family computer thats connect to (#1)router

Please tell me step by step on what to do. please don't hide steps.

[coolt2]

OK maybe i confused people???
i want 1 home network. and i want both routers to work.

                                 Modem
                          ////////                                     
                    #1 router(family room)             #2 router(My Room)
Port 1. goes to #2 router                       Port 1. My room computer
port 2. goes to Family computer              Port 2. PS3
port 3. goes to my bro computer             Port 3. My TV
port 4.Empty                                        Port 4.

[kthaddock]

LAN cable from router 1 LAN-port to router 2 LAN-port.

Turn router 2:
DHCP: OFF
BROADCAST: OFF
UPNP: OFF

Wireless:
Same SSID and PSK-key wpa2+aes on both routers.
Different channel  with 3 channels space. EX: 1 and 5
The routers/clients use roaming.


Good luck
kthaddock
 

[coolt2]

Thanks for the Reply, tho i am still having trouble.
My family router is working but my room router isn't.

i am just going to tell you what i did.

So this is for router #2

Turning off DHCP----- i went to setup- Network Settings. and where its says.
enable DHCP server. I Unchecked the box

Turning Off Broadcast----- i am unsure on where this is located but i beleave its in
the DHCP server settings.

Turning Off upnp----- i went to advanced --- advanced network. 1Unchecked the box.

please varive my steps.

Router #1 is defaut setting.

Connection Type : DHCP Client .
QoS Engine : Active .
Cable Status : Connected .
DNS Status : Online .
Network Status : Established .
Connection Up Time : 0 Day 0 Hour 00 Min 43 Sec .
MAC Address : 00:19:5B:51:73:60 .
Authentication & Security :   .
IP Address : 69.71.228.89 .
Subnet Mask : 255.255.252.0 .
Default Gateway : 69.71.228.1 .
Primary DNS Server : 64.59.144.16 .
Secondary DNS Server : 64.59.144.17 .
Advanced DNS : Disabled .
 .
LAN
MAC Address : 00:19:5B:51:73:5F .
IP Address : 192.168.0.1 .
Subnet Mask : 255.255.255.0 .
DHCP Server : Enabled .
Wireless LAN
Wireless Radio : Enabled .
802.11 Mode : Mixed 802.11n, 802.11g and 802.11b .
Channel Width : 20MHz .
Channel : 3 .
Secondary Channel :   .
WISH : Active .
Wi-Fi Protected Setup : Enabled/Configured


Router #2

wan
connection type: dhcp client
qos engine: active
cable status: connected
network status: incorrectly configured.
ip address: 000.000.0.0
subnet mask: 000.000.000.000
default gateway. 000.000.0.0
primary dns server: 00000000
secondary dns server: 0000000
advanced dns: disabled

LAN

Ip address 192.168.0.1
subnet mask: 255.255.255.0
dhcp server: Disable



Ok there is the status of both routers.
both routers are using 1.33na firmware. and before i did what u said. i resetted both routers by holding the reset button on the back of the router.

[kthaddock]

Thanks for the Reply, tho i am still having trouble.
My family router is working but my room router isn't.

i am just going to tell you what i did.

So this is for router #2

Turning off DHCP----- i went to setup- Network Settings. and where its says.
enable DHCP server. I Unchecked the box

Turning Off Broadcast----- i am unsure on where this is located but i beleave its in
the DHCP server settings.  sorry I mean:Multicast Streams

Turning Off upnp----- i went to advanced --- advanced network. 1Unchecked the box.

please varive my steps.

Router #1 is defaut setting.

Connection Type : DHCP Client .
QoS Engine : Active .
Cable Status : Connected .
DNS Status : Online .
Network Status : Established .
Connection Up Time : 0 Day 0 Hour 00 Min 43 Sec .
MAC Address : 00:19:5B:51:73:60 .
Authentication & Security :   .
IP Address : 69.71.228.89 .
Subnet Mask : 255.255.252.0 .
Default Gateway : 69.71.228.1 .
Primary DNS Server : 64.59.144.16 .
Secondary DNS Server : 64.59.144.17 .
Advanced DNS : Disabled .
 .
LAN
MAC Address : 00:19:5B:51:73:5F .
IP Address : 192.168.0.1 .
Subnet Mask : 255.255.255.0 .
DHCP Server : Enabled .
Wireless LAN
Wireless Radio : Enabled .
802.11 Mode : Mixed 802.11n, 802.11g and 802.11b .
Channel Width : 20MHz . 40Mhz you using N channel
Channel : 3 .
Secondary Channel :   .
WISH : Active .
Wi-Fi Protected Setup : Enabled/Configured


Router #2

wan  LAN
connection type: dhcp client   dhcp off
qos engine: active   Qos off
cable status: connected
network status: incorrectly configured.
ip address: 000.000.0.0
subnet mask: 000.000.000.000
default gateway. 000.000.0.0
primary dns server: 00000000
secondary dns server: 0000000
advanced dns: disabled

LAN

Ip address 192.168.0.1
subnet mask: 255.255.255.0
dhcp server: Disable

I think you miss this step !

LAN cable from router 1 LAN-port to router 2 LAN-port


Ok there is the status of both routers.
both routers are using 1.33na firmware. and before i did what u said. i resetted both routers by holding the reset button on the back of the router.