• February 28, 2025, 11:40:53 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Can't Access DNS-323 After Power Failure  (Read 4408 times)

ActionFreak

  • Level 1 Member
  • *
  • Posts: 6
Can't Access DNS-323 After Power Failure
« on: March 24, 2010, 03:31:02 PM »
The power went off and on a few times yesterday and I can't get to my DNS-323. My router does not show a DHCP entry for the DNS-323 or any unknown devices. There is still some hard drive activity going on. What else can I do before deciding that the DNS-323 is bad?
Logged

robertg

  • Level 1 Member
  • *
  • Posts: 6
Re: Can't Access DNS-323 After Power Failure
« Reply #1 on: March 24, 2010, 03:44:25 PM »
Are the lights working on the front panel? I had to manually turn the dns-323 back on by pressing the front power button after a power failure.
Logged

ActionFreak

  • Level 1 Member
  • *
  • Posts: 6
Re: Can't Access DNS-323 After Power Failure
« Reply #2 on: March 24, 2010, 03:48:45 PM »
Yes. It all looks normal. There is hard drive activity when I first turn it on. I have also restarted the router and switched to another port on the router.
Logged

magic999

  • Level 1 Member
  • *
  • Posts: 10
Re: Can't Access DNS-323 After Power Failure
« Reply #3 on: March 25, 2010, 02:08:11 AM »
I had the same problem a couple of weeks ago

I run several DNS-323s and one "disappeared" from my network after a series of power cuts

It had lost it's static IP address and a few other settings like drive mapping

I used the Easysearch utility to locate it again and re-entered the IP settings manually and now it is working fine again
« Last Edit: March 27, 2010, 04:54:15 PM by magic999 »
Logged

ActionFreak

  • Level 1 Member
  • *
  • Posts: 6
Re: Can't Access DNS-323 After Power Failure
« Reply #4 on: March 25, 2010, 04:04:11 PM »
Easy Search Utility worked. Thanks. It had an address from similar to my WAN address so I just gave it an address on my LAN.
Logged