• February 23, 2025, 06:24:51 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: can't upgrade to firmware 1.24*  (Read 5987 times)

farble1670

  • Level 1 Member
  • *
  • Posts: 1
can't upgrade to firmware 1.24*
« on: September 18, 2010, 06:06:13 PM »
DIR-628, rev A2

i try to update to 1.24. select file, upload. get the message to wait. the router goes offline for about 10 seconds then comes back up, but it's still on the old firmware, 1.23NA.

the only thing i see the logs that might be relevant is,
"Firmware upgrade server wrpd.dlink.com.tw is at IP address 210.242.32.129"

also, when i say "check for new firmware", it tells me i have the latest, even though i'm at 1.23NA and i see 1.24NA on the d-link website.

i've updated several times before so i think i have the correct process. if my hardware rev too old or something? any other ideas?
« Last Edit: September 18, 2010, 06:19:15 PM by farble1670 »
Logged

shylagee

  • Level 1 Member
  • *
  • Posts: 1
Re: can't upgrade to firmware 1.24*
« Reply #1 on: September 21, 2010, 11:59:46 AM »
I'm having the same problem.  WHen I download the firmware update 1.24, extract the zipped files, the configuration file is a .bin file that isn't recognized by my computer.  I've downloaded a couple of emulators, but can't get either of them to work...  I'm running windows xp sp3, any ideas?
Logged

ezeltmann

  • Level 1 Member
  • *
  • Posts: 1
Re: can't upgrade to firmware 1.24*
« Reply #2 on: September 26, 2010, 06:02:16 AM »
Hey there,

I was having the same exact problem, but finally got it to work this morning.  Here's what I did:

1. Go into Tools >> System.
2. Save your firmware settings to a file and put the file on your PC.
3. Click on the "Restore to Factory Defaults" button.  This will completely reset the settings on your router.
4. After the router reboots, go back to the router (mine was still at 192.168.0.1) and log in (the admin password will be blank, just hit the button to login).
5. Go to Tools >> Firmware
6. Upgrade the firmware to the latest version (1.24 if you've got it).
7. Allow the system to reboot, hopefully it will show the version as 1.24 after it's done.
8. Log back in (again, the password should be blank for admin).
9. Go to Tools >> System, reload your settings from the file you made in step 2.
10. The router should reset one more time, and after, you should be good to go.

I did this on a DIR-628 Hardware: A2 Firmware: 1.22NA, which successfully upgraded to 1.24NA firmware.

Hope this helps!
Logged