• November 01, 2024, 01:27:22 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Unable to speak/route during auto-attendant  (Read 7486 times)

campanella

  • Level 1 Member
  • *
  • Posts: 4
Unable to speak/route during auto-attendant
« on: February 17, 2009, 03:44:07 PM »
Ever since we installed SP2 (perhaps it was before and we didn't notice) we have callers complaining that they cannot "say the name of the person they want" until the auto-attendant recording has completely finished. Extensions also cannot be entered. Is this by design?

Logged

lneblett

  • Level 1 Member
  • *
  • Posts: 11
Re: Unable to speak/route during auto-attendant
« Reply #1 on: February 17, 2009, 05:03:40 PM »
See the Barge-In messages posted earlier. This explains what you are experiencing.
Logged

Mlachake

  • Poweruser
  • Level 3 Member
  • ***
  • Posts: 203
Re: Unable to speak/route during auto-attendant
« Reply #2 on: February 19, 2009, 08:46:08 AM »
Please bear in mind that voice burge-in is no longer supported in SP2 only during the AA greetings. Voice is still supported only after the AA greetings completes. However, DTMF burge-in is still supported in SP2. Callers can still burge-in by dialing the intended extension at any time during the AA greetings. As I said, callers have to wait for the AA to complete before voice is activated.
« Last Edit: February 19, 2009, 11:51:22 AM by Mlachake »
Logged

campanella

  • Level 1 Member
  • *
  • Posts: 4
Re: Unable to speak/route during auto-attendant
« Reply #3 on: February 20, 2009, 08:11:16 AM »
thanks for the note
Logged

Mlachake

  • Poweruser
  • Level 3 Member
  • ***
  • Posts: 203
Re: Unable to speak/route during auto-attendant
« Reply #4 on: February 20, 2009, 08:46:31 AM »
You are welcome.
Logged

quicktech

  • Level 1 Member
  • *
  • Posts: 5
Re: Unable to speak/route during auto-attendant
« Reply #5 on: February 26, 2009, 08:19:28 AM »
Below is the MSDN Blog I read it from; below that is the excerpt from the blog if you don't want to go to it.

http://blogs.msdn.com/robertbrown/archive/2009/02/20/sp2-has-been-updated-to-support-speech-barge-in.aspx

Microsoft has listened and updated SP2 to include Barge-In on AA.

To install it....

Rather than supply a separate patch that would need to be applied every time you installed SP2, we've slip-streamed the fix directly into SP2.

   1. Download the current http://www.microsoft.com/downloads/details.aspx?FamilyID=5cb5dfc0-cc00-4446-b087-455322d04003&displaylang=en and unzip it.  (If you've downloaded SP2 prior to today, just download it again to pick up the optional barge-in functionality)
   2. Install the Administrator software on your workstation.
   3. When you log in to Administrator, it will prompt you to upgrade the base unit.  When you're done, your base unit software version should be 1.21.5017.0

Dustin
Logged

CCS

  • Level 1 Member
  • *
  • Posts: 13
Re: Unable to speak/route during auto-attendant
« Reply #6 on: June 02, 2009, 11:16:34 AM »
Is there an option to dial 0 ?  I used to be able to bypass to auto attendant by dialing 0 before upgrading to service pack 2
Logged