Topic: Creating multiple wan interfaces on DFL-210 (Read 4886 times)

hana · « **on:** January 26, 2011, 01:47:47 AM »

I have a DFL-210 firewall (one WAN port) and many public IP addresses in two ranges (with two different gateways). Lets say they are:

A. 123.111.222.0/29 (Gateway 123.111.222.6)
B. 123.111.333.81/28 (Gateway 123.111.333.81)

I want to use the A addresses for publicly addressed servers on the LAN, and B addresses for servers on the DMZ interface.

Is it possible? Can someone point out where to find a configuration guide? I cannot find such a guide on ftp://files.dlink.com.au/Products/DFL-210/REV_A/SetupGuides/

silver_surfer30 · « **Reply #1 on:** January 30, 2011, 11:29:19 PM »

that should be possible by adding the second table on wan interface using the routing menu.
but only one of the gateway will be used.

chechito · « **Reply #2 on:** March 10, 2011, 01:02:58 PM »

the procedure implies many aspects:

You will need to publish any ip address you want to use as interface in the firewall using arp publish

Create respective interface and core routes and routing tables using appropriate local addresses.

Routing rules to chose which routing table use to the respective traffic incoming and outgoing.

scrubsguy · « **Reply #3 on:** July 21, 2011, 01:21:15 AM »

how is your dfl-210 connected in your network? but this i mean, switch to server >server to dfl>dfl -router?

D-Link Forums

News:

Author Topic: Creating multiple wan interfaces on DFL-210 (Read 4886 times)

hana

Creating multiple wan interfaces on DFL-210

silver_surfer30

Re: Creating multiple wan interfaces on DFL-210

chechito

Re: Creating multiple wan interfaces on DFL-210

scrubsguy

Re: Creating multiple wan interfaces on DFL-210