Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[emax]

daedao,

Check your PM.  Hopefully you can find a solution.  Thanks.

[daedao]

daedao,

Check your PM.  Hopefully you can find a solution.  Thanks.

I've checked my PM and also my email, and.. nothing.
You could paste the source code on http://pastebin.com/ and just give me the link to it.

[daedao]

emax


In Firefox, in Firebug's console, execute the following:

check_LAN_ip=function(){return true;};
check_address=function(){return true;};

and then try to save the settings. Let me know if it works.

[emax]

daedao,

I used the dagodfather method and that has been working.  Hopefully soon I will try out your Firebug java method.  Thank you for your help.

[synergy]

I got WOL to work for DIR-655, Hardware Version: B1, Firmware Version: 2.00NA

FIRST STEP
On SETUP, NETWORK SETTINGS, I changed the Subnet Mask to 255.255.255.128, where the Router IP Address was already set to 192.168.0.1

SECOND STEP
I then saved the change. My router hung and had to reset it, but the change occurred. Admittedly this is a pain in the ass, but blame D-LINK.

THIRD STEP
On ADVANCED, VIRTUAL SERVER, I added 192.168.0.127 as the device to wake-up EVEN THOUGH the actual IP Address of the PC I want to wake-up is 192.168.0.100. I am not an expert, but I believe ALL PCs on my local network that are setup to Wake-up On Lan, will in fact wake-up. I can live with that as ONLY my PC that is PERMANENTLY ASSIGNED 192.168.0.100 is set to wake up which is exactly what I want. BEFORE saving the changes on ADVANCED, VIRTUAL SERVER, I additionally set Name to Wake-On-LAN, Public and Private ports to 9, Protocol to UDP, Schedule to Always, Inbound Filter to Allow All. I then saved the changes.

I can't begin to tell you how many suggestions I tried that did NOT work! However the above procedure worked for my DIR-655, Hardware Version: B1, Firmware Version: 2.00NA.

OMG!...Thank you!  This worked for me, and is the only suggestion that worked!  I can confirm it works on B1 hardware version with 2.01NA firmware.

[dougk]

I have h/w version A3 with firmware version 1.21.  WOL worked only after the following:

1) reset to factory settings (still 1.21 firmware)
2) Automatically selected "wake-on-lan" from virtual server application name
3) Automatically selected PC from virtual server computer name, then changed IP to 192.168.0.255
4) public & private port to 9
5) Schedule = always, inbound filter = allow all

Unfortunately one of my PC's (which was working fine) suddenly doesn't wake up any longer.  I checked all the PC and bios settings and they look correct.  So I downloaded Wireshark on all PC's on the network and sure enough the PC's that wake up all receive the magic packet, however the one that isn't waking up doesn't receive it!  I've tried changing ports on the router between PC's and keep getting the same result.  Can anyone explain why a broadcast magic packet would get sent to some computers but not others...I'm perplexed!?

Doug

[selkov]

Last night I installed the newest firmware  1.35na  onto my version 1 DIR-655. Followed instructions supplied here and it worked! In fact i can power on my pc from my windows phone as well.....coooool.


PS...when using a packet sender OR Depicus be sure to set the subnet mask to 255.255.255.255.

[churin]

I am very much interested in the post by mh0001 above.  He states that he has no problem at all without any trick or workaround.  Only difference between his router and mine is that his firmware is 134EU and mine is 135NA.  It appears that the solution is replacing(flashing) my FW with 134EU.  Comment is appreciated.

[FurryNutz]

If your unit is a NA router and has NA FW loaded then loading EU will present you with other problems as NA and EU FW are very different.

[churin]

If your unit is a NA router and has NA FW loaded then loading EU will present you with other problems as NA and EU FW are very different.

NA router or EU router?  I understand there are two different HW versions, A or B. Is there still another way to designate HW version?

[FurryNutz]

A# or B# is all that I've ever seen.

[churin]

Then what do you mean by "NA router" or "EU router"? How can I tell which one I have?

[FurryNutz]

Sticker under the router.

[churin]

Here is the sticker. It shows HW version and FW version being A4 and 132NA respectively. Is this EU router
or NA router? What to look to determine which one it is?

[adoggy]

Hi,
Im wondering if someone can help me with the command/code in firbug to disable the message about range of ip-adress.
I have tried page_verify=function(){return 1;}
and
check_LAN_ip=function(){return true;};
check_address=function(){return true;};

but nothing seems to do it, I would appreciate any help