• April 23, 2025, 07:58:02 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Stupidly mixed up power supplies - help!  (Read 5040 times)

Alabama978

  • Level 1 Member
  • *
  • Posts: 3
Stupidly mixed up power supplies - help!
« on: February 18, 2012, 03:30:22 AM »
On a recent house move the DNS 323 got separated from it's PSU :(

I have found two similar PSU's amongst my boxes unpacked so far.  Can someone please tell me if either is for the Dlink?

Details are:

Jentec Technology Ltd - outputs 5V 3A and 12V 3A

CD Coming Ltd - outputs 5V 2A and 12V  2A

Both are wired the same way...

Looking at 4 pin connector diagram

top left - 5V  Top right 12V

Bottom two pins Gnd

If either of these aren't the correct PSU then I have to do some more digging ;)
Logged

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: Stupidly mixed up power supplies - help!
« Reply #1 on: February 18, 2012, 05:19:56 AM »
The manual is your friend.  On page 4 it says: Power Supply 12v 3A, 5v 3A.  The manufacturer does not matter, the output is what you are interested in.
Logged

dosborne

  • Level 5 Member
  • *****
  • Posts: 598
Re: Stupidly mixed up power supplies - help!
« Reply #2 on: February 18, 2012, 10:39:36 AM »
Quote from: ivan on February 18, 2012, 05:19:56 AM
The manufacturer does not matter, the output is what you are interested in.
I would diagree as the pin configuration is critical. I don' have mine handy, otherwise I'd be happy to answer the question.
Logged
3 x DNS-323 with 2 x 2TB WD Drives each for a total of 12 TB Storage and Backup. Running DLink Firmware v1.08 and Fonz Fun Plug (FFP) v0.5 for improved software support.

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: Stupidly mixed up power supplies - help!
« Reply #3 on: February 18, 2012, 01:19:26 PM »
Based on the information given by Alabama978, the 3A unit is the correct one - I also did a physical check of one of ours before I posted my first reply.
Logged

Steve Pitts

  • Level 2 Member
  • **
  • Posts: 68
  • A twelfth man at silly mid on
Re: Stupidly mixed up power supplies - help!
« Reply #4 on: February 18, 2012, 01:23:31 PM »
Quote from: Alabama978 on February 18, 2012, 03:30:22 AM
Can someone please tell me if either is for the Dlink?
FWIW the PSU that came with my DNS323 is from Jentec and produces a 3A DC output
Logged
Cheers, Steve

Running a DNS-323 Rev. C1 with FW 1.10b5, fun_plug 0.5 and 1 Western Digital WD20EARS-00MVWB0, 4K aligned by 1.10FW, in Standard mode as a single volume

Alabama978

  • Level 1 Member
  • *
  • Posts: 3
Re: Stupidly mixed up power supplies - help!
« Reply #5 on: February 19, 2012, 03:13:40 AM »
Many thanks to you all for the information :)

It seems the Jentec is the one.

I didn't want to try any until I had some info from the forum as I am not convinced that all manufacturers would use the same pinout.

As for the DNS it will be a test of my memory as I am not 100% sure about the pasword LOL.

Logged