• February 22, 2025, 09:31:33 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Wifi broadcasting even when disabled  (Read 13810 times)

Kcolyhs

  • Level 1 Member
  • *
  • Posts: 2
Wifi broadcasting even when disabled
« on: July 27, 2009, 12:24:50 PM »
I have a problem with my Dir-451.
Even when wifi is disabled, the unit is broadcasting a strong signal on channel 1 without an SSID.
The Wifi indicator on the unit is off, but Netstumbler shows a strong transmission from the device.
This issue is causing problems in my setup as it interferes with other client's ability to connect to other access points.
I have tried Firmare 1.2 beta 25, 1.2 beta 26, and 1.21. The problem is present in all firmware versions.
I hope you can provide a solution.
Thanks
« Last Edit: July 27, 2009, 07:57:04 PM by Kcolyhs »
Logged

Kcolyhs

  • Level 1 Member
  • *
  • Posts: 2
Re: Wifi broadcasting even when disabled
« Reply #1 on: August 11, 2009, 07:45:32 PM »
Follow-up: Firmware 1.21 is very stable with the Huawei E180.
All functions work as they should, and the LED indicators work properly.
The major issue is the unwanted Wifi broadcasting on startup even when wifi is disabled.
The solution: enable wifi, save settings, disable wifi, save settings. Then Wifi stops broadcasting.
This must be done every time the DIR is switched on.
For some reason the DIR-451 ignores the disabled wifi setting on startup.
Logged

sirikit

  • Level 1 Member
  • *
  • Posts: 1
Re: Wifi broadcasting even when disabled
« Reply #2 on: September 02, 2009, 08:02:43 AM »
Where do I find firmware 1.21?  ???
Logged