Topic: DIR-827 with Iomega ix4-200d Slow NAS Transfer Rate through Router (Read 5544 times)

Jason_Canada · « **on:** January 17, 2013, 05:23:47 PM »

Hello,

I've recently have gone through a tremendous amount of personal time setting up my NAS drive with my DIR-827 Router. I have found though that no matter where I am, the upload and download Speed, notably more so the download is horribly slower then the upload when the Router is connected to the NAS.

Are there any suggestions or others steps I can do to maximize the performance. It's my understanding that the Cloud should operate at the same speed at as the service I'm using? I'm a novice to moderate user in this learning on my own step by step. Thanks for your patience.

Jason

FurryNutz · « **Reply #1 on:** January 17, 2013, 05:25:06 PM »

Use a external Gb network switch between the router and all wired LAN devices.

Jason_Canada · « **Reply #2 on:** January 17, 2013, 05:30:20 PM »

I should have specified that it's only slow during the use of it Remotely on the Cloud.

That should be a bit clearer. :-) Locally its fine.

FurryNutz · « **Reply #3 on:** January 17, 2013, 06:26:35 PM »

Test speeds with SPI ON or OFF?
NAT set to EndPoint Independent?

Whats your ISP Speed UP and Down?
Cloud meaning?
This router isn't an actual Cloud router.

I think that usually any remote access from the WAN side to anything on the LAN side is going to have some performance impact, many variables can effect performance. ISP services, ISP Modem, connections and everything in between.

D-Link Forums

News:

Author Topic: DIR-827 with Iomega ix4-200d Slow NAS Transfer Rate through Router (Read 5544 times)

Jason_Canada

DIR-827 with Iomega ix4-200d Slow NAS Transfer Rate through Router

FurryNutz

Re: DIR-827 with Iomega ix4-200d Slow NAS Transfer Rate through Router

Jason_Canada

Re: DIR-827 with Iomega ix4-200d Slow NAS Transfer Rate through Router

FurryNutz

Re: DIR-827 with Iomega ix4-200d Slow NAS Transfer Rate through Router